PSASC Datasheet, PDF (1/3 Pages) Wall Industries,Inc. – 30 Watt Encapsulated PCB Mount Single, Dual, and Triple Output AC/DC Switching Power Supply

FEATURES
● Built-in EMI Filter
● Approvals: TUV/CE
● Full Range AC Input
● PWM Control Circuit
● DC Output Plug Option
● Low Cost, High Reliability
● Fully Enclosed Plastic Case
● 100% Full Load Burn-in Tested
● 2 Round Pin (Euro Plug-In), Class II
● Overload and Short Circuit Protection
● MTBF > 200,000 Hours per MIL-HDBK-F @ 25°C
PSASC Series
30 Watt
Encapsulated PCB Mount
Single, Dual, and Triple Output
AC/DC Switching Power Supply
SPECIFICATIONS: PSASC Series
All specifications are based on 25^oC, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
INPUT SPECIFICATIONS
Input Voltage Range
90 ~ 260VAC
Input Frequency
47 ~ 440Hz
OUTPUT SPECIFICATIONS
Output Voltage
See Table
Output Power Range
30 Watts max.
Voltage Accuracy
±2%
Line Regulation (LL – HL)
Single & Dual Outputs: ±1%; Triple Output: 5V (±1%), ±12V & ±15V (±5%)
Load Regulation (5% to 100%)
Single Output: ±1%; Dual Output: ±3%; Triple Output: 5V (±2%), ±12V & ±15V (±6%)
Output Current
See Table
Ripple (Vp-p)
0.2% +40mVp-p max.
Noise (Vp-p)
0.5% +50mVp-p max.
Temperature Coefficient
±0.02%/°C
PROTECTION
Short Circuit Protection
Hiccup mode, indefinite (automatic recovery)
GENERAL SPECIFICATIONS
Switching Frequency
100KHz
Efficiency
See Table
Isolation Voltage (Input to Output)
3000VAC
Isolation Resistance
10GΩ min.
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
-25°C to +71°C
Storage Temperature
-40°C to +85°C
Cooling
Free air convection
PHYSICAL SPECIFICATIONS
Case Material
P.B.T. + Fiberglass
Weight
220g
Dimensions
3.5(L) x 2.5(W) x 0.98(H) inches (89.0(L) x 63.5(W) x 25.0(H) mm)
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax [phone]