PSAQF160 Datasheet, PDF (1/6 Pages) Wall Industries,Inc. – AC/DC Switching Power Supplies

Wall Industries, Inc.
Rev A
PSAQF160 SERIES
Up to 160 Watts, AC/DC Switching Power Supplies
Terminal Block Type (Standard)
Size: 4.67 x 2.05 x 1.14 inches (118.5 x 52.1 x 29.0 mm)
Molex Series 8673 Type (“A” Suffix)
FEATURES
• RoHS Compliant
• Isolation Class I
• High Efficiency up to 91.5%
• 4.0” x 2.0” Open Frame Package
• < 0.5W No Load Input Power
• Single Outputs
• 12V (Aux) / 0.3A
• Meets EN55022 Class B
• Universal Input Range: 90~264VAC (120~370VDC)
• Active PFC Function, PF > 0.95 at 230VAC
• 160 Watts Output Power with 25CFM Fan
• 100 Watts Output Power with Free Air Convection
• -25°C~+70°C Operating Temperature Range
• Short Circuit, Over Power, Over Voltage, and Over
Temperature Protection
• UL60950-1 Safety Approvals (Pending)
Size: 4.27 x 2.05 x 1.14 inches (108.5 x 52.1 x 29.0 mm)
DESCRIPTION
The PSAQF160 series of AC/DC switching power supplies provides 100 Watts of output power
with free air convection and 160 watts with 25CFM fan in an ultra compact 4.0” x 2.0” open frame
package. This series consists of 12V, 15V, 24V, and 48VDC single output models with a universal
input voltage range of 90-264VAC (120~370VDC). Some features include up to 91.5% high
efficiency, < 0.5W no load input power, and power factor > 0.95 at 230VAC. This series is also
protected against short circuit, over power, over voltage, and over temperature conditions. The
PSAQF160 series is RoHS compliant and meets EN55022 Class B requirements.
Model Number ⁽¹⁾ Input Voltage
PSAQF160-12S (A)
PSAQF160-15S (A) _{90~264 VAC}
PSAQF160-24S (A) ^{(120~370 VDC)}
PSAQF160-48S (A)
Output
Voltage
12 VDC
15 VDC
24 VDC
48 VDC
MODEL SELECTION TABLE
Output Current
Convection 25CFM Fan
Output Power ⁽³⁾
Convection 25CFM Fan
Ripple & Noise ⁽²⁾
Maximum
Capacitive Load
Efficiency
8.4A
13.3A
100W
160W
130mVp-p
3000µF
90%
6.7A
10.6A
100W
159W
150mVp-p
2000µF
90%
4.2A
6.6A
100W
158W
240mVp-p
360µF
90.5%
2.1A
3.33A
100W
160W
480mVp-p
180µF
91.5%
NOTES
1. Terminal block I/O connectors are standard; for Molex series 8673 I/O connectors please add the suffix “A” to the model number (Ex: PSAQF160-12SA).
2. Ripple & Noise are measured at 20MHz bandwidth and with 0.1µF and 47µF capacitors in parallel across the output.
3. Output Power: 100W max. with convection cooling and 160W max. with 25CFM forced air cooling.
BLOCK DIAGRAM
L
+Vo
N
-Vo
O.C.P.
ISOLATION
DETECTION
CIRCUIT
Vout Adj.
DC ON (LED)
05/05/2014
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: [phone] • Toll Free: 888-597-9255 • Fax [phone]
website: www.wallindustries.com • e-mail: [e-mail]
Page 1 of 6