PSAPF150 Datasheet, PDF (1/4 Pages) Wall Industries,Inc. – AC/DC LED Switching Power Supplies

Wall Industries, Inc.
Rev A
PSAPF150 SERIES
150 Watt, AC/DC LED Switching Power Supplies
Size:
5.66 x 2.79 x 1.48 inches
143.8 x 70.8 x 37.5 mm
Applications:
 Street Lighting
 Landscape Lighting
 Tunnel Lighting
 Household Lighting
 Indoor/Outdoor LED Lighting
FEATURES
 Isolation Class II
 RoHS Compliant
 Built-in Active PFC Function
 150 Watts Maximum Output Power
 Free Air Convection
 MTBF > 75,000 Hours
 Up to 93.5% High Efficiency
 LED Power Applications
 Fully Isolated Plastic Case with IP67 Level
 3-in-1 Dimming Function (1~10VDC & PWM Signal or
Resistance)
 Universal Input Voltage: 90~305VAC (120~430VDC)
 Short Circuit, Over Voltage, Over Power, and Over
Temperature Protection
 Output Voltage and Constant Current Level can be
Adjusted through Internal Potentiometer
DESCRIPTION
The PSAPF150 series of AC/DC LED switching power supplies provides a maximum power rating
of 150W in a 5.66” x 2.79” x 1.48” fully isolated plastic case. These supplies meet IP67 waterproof
standards, which makes them suitable for harsh environments in industrial or commercial
outdoor lighting applications. The PSAPF150 series boasts the industry’s widest input voltage
range of 90-305VAC (120~430VDC) and has built-in active PFC, built-in dimming function, and
high efficiency up to 93.5%. This series is RoHS compliant and has short circuit, over voltage, over
power, and over temperature protection.
Model Number
PSAPF150-12S
Input Voltage
Output
Voltage
12 VDC
MODEL SELECTION TABLE
Constant Output Current
Current Range (Convection)
Current
Adj. Range
Ripple & Noise ⁽¹⁾
Maximum
Capacitive Load
6~12 VDC
12.5A
1.25~12.5A
100mVp-p
100,000μF
Maximum
Output Power
150W
Efficiency
90.5%
PSAPF150-24S
PSAPF150-36S
PSAPF150-48S
90~305VAC
(120~430VDC)
24 VDC
36 VDC
48 VDC
12~24 VDC
18~36 VDC
24~48 VDC
6.25A
4.166A
3.125A
0.625~6.25A
0.416~4.166A
0.312~3.125A
100mVp-p
100mVp-p
200mVp-p
50,000μF
33,000μF
6,000μF
150W
150W
150W
92.5%
93.5%
92.5%
PSAPF150-54S
54 VDC 27~54 VDC
2.777A
0.377~2.777A 200mVp-p
6,000μF
150W
92.5%
NOTES
1. Ripple & Noise is measured at 20MHz bandwidth and with 0.1μF and 47μF capacitors in parallel.
DERATING CURVES
Load vs Ambient Temperature
120
100
80
60
50%
40
20
25%
0
-30 -20 -10 0 10 20 30 40 50 60 70 80
Ambient Temperature (°C)
120
100
80
60
40
20
0
90
Load vs Input Voltage
Ta=25°C
115 135 155 230 264 305
Input Voltage (VAC)
05/08/2013
Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: [phone] • Toll Free: 888-597-9255 • Fax [phone]
website: www.wallindustries.com • e-mail: [e-mail]
Page 1 of 4