PSAE1500 Datasheet, PDF (1/8 Pages) Wall Industries,Inc. – AC/DC Switching Power Supplies

Wall Industries, Inc.
Rev B
PSAE1500 SERIES
1500 Watts, AC/DC Switching Power Supplies
FEATURES
• RoHS Compliant
• PFC > 0.95 at 230VAC
• Up to 1502 Watts Output Power
• High Efficiency up to 93%
• 3000VAC (4242VDC) I/O Isolation
• Constant Current Limiting
• Global Control via RS232
• Power OK Signal
• Protection: OLP, OVP, OTP, Fan Failure
• Remote Sensing Multiple PSU via RS232, RS485 & I²C
• Programmable Output Voltage (0~105%)
• Programmable Output Current (0~105%)
• Remote ON/OFF, Remote Sense Functions
• Universal Input Voltage Range: 90~264VAC (127~370VDC)
• Single Outputs Ranging from 12VDC to 60VDC
• Selectable +5V/0.5A or +9V/0.3A Auxiliary Output
• Forced Current Sharing at Parallel Operation
• UL 60950-1 and EN60950-1 Safety Approvals
Size:
11.02 x 5.00 x 2.50 inches
(280.0 x 127.0 x 63.5 mm)
Weight:
5.73 lbs (2.6kg)
DESCRIPTION
The PSAE1500 series of AC/DC switching power supplies provides up to 1502 Watts of output power in a
11.02” x 5.00” x 2.50” enclosed case. This series consists of single output models ranging from 12VDC to
60VDC with a universal input voltage range of 90~264VAC (127~370VDC). Standard features include high
efficiency up to 93%, PFC > 0.95 at 230VAC, programmable output voltage and output current, remote
on/off, remote sense, and power OK signal. This series also has over temperature, over voltage, and over
load protection. All models are RoHS compliant and have UL 60950-1 and EN60950-1 safety approvals.
MODEL SELECTION TABLE
Model Number Input Voltage ⁽²⁾ Output Voltage Output Current Line Regulation Load Regulation Output Power Ripple & Noise ⁽¹⁾ Efficiency
PSAE-1500-12
12 VDC
125A
±1.0%
±1.0
1500W
120mVp-p
89%
PSAE-1500-15
15 VDC
100A
±1.0%
±1.0
1500W
150mVp-p
90%
PSAE-1500-24
PSAE-1500-30
PSAE-1500-36
90~264 VAC
(127~370 VDC)
24 VDC
30 VDC
36 VDC
62.5A
50A
41.7A
±1.0%
±1.0%
±1.0%
±1.0
1500W
240mVp-p
92%
±1.0
1500W
300mVp-p
92%
±1.0
1501W
360mVp-p
92%
PSAE-1500-48
48 VDC
31.3A
±1.0%
±1.0
1502W
480mVp-p
92%
PSAE-1500-60
60 VDC
25A
±1.0%
±1.0
1500W
600mVp-p
93%
NOTES
1. Ripple & noise is measured at 20MHz limited bandwidth and using a 12" twisted pair-wire terminated with a 0.1µF & 47µF capacitors in parallel.
2. For voltages near the low end of the input voltage range, see the derating curve for the power supply output rating.
3. When in parallel operation only one unit might operate if the total output load is less than 5% of the rated load condition.
4. The power supply is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
DERATING CURVES
Load vs Ambient Temperature
120
100
80
60
40
20
Load vs Input Voltage
120
100
Ta=25°C
90
80
70
60
50
40
-25 0 10 20 30 40 50 60 70 80
Ambient Temperature (°C)
90
100
110
120
264
Input Voltage (VAC)
10/14/2013
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: [phone] • Toll Free: 888-597-9255 • Fax [phone]
website: www.wallindustries.com • e-mail: [e-mail]
Page 1 of 8