LANEC Datasheet, PDF (1/2 Pages) Wall Industries,Inc. – Single Output, to 1 Watt dc/dc converters

LANE-C SERIES
Single Output, to 1 Watt
dc/dc converters
Features
• ultra miniature 7 pin SIP
• 1000VDC I/O isolation
• fully regulated
Overview
The LANE-”C” Series is a miniature, isolated and regulated series of DC/DC converters. These have
input operation of 5V, 12V, 24V and 48V and outputs of 5V, 9V, 12V, and 15V delivering 1 watt of power
. This series is specifically designed for use with Flash PROM devices providing the required stability
for the programming voltage. A control pin is provided to reduce the output voltage to a low level,
1.2VDC, to program Flash PROMs.
Specifications
input
input voltage range
input voltage tolerance
All specifications apply at 25ºC unless otherwise noted.
5,12,15,24VDC
±5% tolerance
output
output current
voltage tolerance
line regulation (HL-LL)
load regulation (10-100% load)
ripple/noise (20MHz BW)
see table
±5%(nominal line, 100% load)
1% of Vin
1% of Vin
60mV p-p
general
efficiency (5V out)
efficiency (9,12,15V out)
isolation voltage (input to output)
isolation resistance (input to output)
switching frequency
45% min.
55% min.
1000VDC
20kHz (min.)
environmental operating temperature
storage temperature
0 to +71°C
-25 to 100°C
physical
dimensions
0.765 x 0.235 x 0.37”
due to advances in technology, specifications subject to change without notice.
888 597-9255
www.wallindustries.com
1
9/7/2003