JFW Datasheet, PDF (1/6 Pages) Wall Industries,Inc. – 15W Open Frame DC/DC Power Converters

DATASHEET
Rev. D
JFW SERIES
4:1 Ultra Wide Input Voltage Range
DIP and SMT Type Packages
Single Outputs, RoHS Compliant
15W Open Frame DC/DC Power Converters
APPLICATIONS
 Wireless Networks
 Telecom / Datacom
 Industry Control Systems
 Measurement Equipment
 Semiconductor Equipment
OPTIONS
 SMT Type
 Without Trim Pin
 Without ON/OFF Pin
 Negative Logic Remote ON/OFF
FEATURES
 15 Watts Maximum Output Power
 Single Output up to 4A
 Cost Efficient Open Frame Design
 Small Size and Low Profile: 1.10” x 0.94” x 0.34”
 High Efficiency up to 87%
 4:1 Ultra Wide Input Voltage Range
 Fixed Switching Frequency
 Input to Output Isolation: 2250VDC
 No Minimum Load Requirement
 Output Voltage Adjustability
 Industry Standard Pin-out
 Negative or Positive Remote ON/OFF Control
 Over Current, Over Voltage, and Input Under Voltage Protection
 Surface Mount and Through Hole Types Available
 SMT Package Qualified for Lead-free Reflow Solder Process
According to IPC J-STD-020D
 CE Mark Meets 2006/95/EC, 93/68/EEC, and 2004/108/EC
 UL60950-1, EN60950-1, and IEC60950-1 Licensed
 ISO9001 Certified Manufacturing Facilities
DESCRIPTION
The JFW series of DC/DC power converters provides 15 Watts of output power in a low profile industry standard package and footprint.
These converters have single outputs and operate over 4:1 input voltage ranges of 9-36VDC and 18-75VDC. These units are also
protected against over current, over voltage, and input under voltage conditions. Some features include high efficiency up to 87%,
adjustable output voltage, and positive or negative remote ON/OFF control. These converters are RoHS compliant and have UL60950-1,
EN60950-1, and IEC60950-1 safety approvals. Both surface mount (“S” suffix) and DIP (standard) packages are available.
10/18/2011
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax [phone]
Page 1 of 6