DTSPU63 Datasheet, PDF (1/3 Pages) Wall Industries,Inc. – 63 Watt Single Output AC/DC Desktop Power Supply

Rev B
FEATURES
● Splash Proof
● 2 Year Warranty
● Class I Insulation
● IEC-320-C14 Input Inlet
● Optional Output Connector
● CEC and Energy Star Compliance
● Approved as Limited Power Source (LPS)
● Over Voltage Protection (Crowbar Design)
● Wide Input Voltage 90 to 264VAC, 47~63Hz
● Output Voltage Available from 12VDC thru 50VDC
DTSPU63 Series
63 Watt
Single Output
AC/DC Desktop Power Supply
SPECIFICATIONS: DTSPU63 Series
All specifications are based on 25^oC, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min Nom Max
INPUT (V_in)
Operating Voltage Range
90
264
Input Frequency
47
63
Input Current (Low Line)
Io = Full Load, Vin = 115VAC
1.6
Input Current (High Line)
Io = Full Load, Vin = 230VAC
0.7
Inrush Current (Low Line)
Io = Full Load, 25°C, Cool Start, Vin = 115VAC
12
15
Inrush Current (High Line)
Io = Full Load, 25°C, Cool Start, Vin = 230VAC
26
30
Safety Ground Leakage Current
Io = Full Load, Vin = 240VAC
0.5
0.75
Start-Up Time
Io = Full Load, Vin = 100VAC
0.3
1
2
OUTPUT (V_o)
Output Voltage Range
See Rating Chart
Load Regulation
Vin = 230VAC
3
5
Line Regulation
Io = Full Load
0.5
1
Output Power Range
Vin = 90 to 264VAC
0
63
Output Current Range
See Rating Chart
Ripple & Noise (peak to peak)
Full Load, Vin = 90VAC
0.5
1
Transient Response
Io = Full Load to Half Load, Vin = 100VAC
4
Hold-Up Time
Io = Full Load, Vin = 110VAC
16
PROTECTION
Over Voltage Protection
112
132
Over Current Protection
102
150
GENERAL
Efficiency
Io = Full Load, Vin = 230VAC
84
88
91
Dielectric Withstanding Voltage
For Primary to Secondary
Primary to Secondary
4242
Dielectric Withstanding Voltage
For Primary to Ground
Primary to Ground
2121
Isolation Resistance
Test Voltage = 500VDC
50
Power Consumption (No Load)
No Load, Vin = 240VAC
0.1
0.5
ENVIRONMENTAL
Operating Temperature
Derate linearly from 100% Load at 40°C to 50% load at 70°C
0
70
Storage Temperature
-40
85
Relative Humidity
5
95
Temperature Coefficient
All Outputs
-0.04
+0.04
MTBF
Operating Temp. at 25°C, Calculated per MIL-HDBK-217F
130,000
PHYSICAL
Weight
Approximately 340g
Dimensions
4.65 x 2.05 x 1.36
Warranty
2
SAFETY
CISPR
Vin = 220VAC
B
FCC
Vin = 110VAC
B
Safety Standards
UL/CUL, TUV-GS, CE, CB, PSE
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax [phone]
Unit
VAC
Hz
A
A
A
A
mA
s
VDC
%
%
W
A
%
ms
ms
%
%
%
VDC
VDC
MΩ
W
°C
°C
%
%/°C
hours
grams
inches
years
Class
Class