DTSPU50 Datasheet, PDF (1/3 Pages) Wall Industries,Inc. – 60 Watt Single Output AC/DC Desktop Power Supply

Rev B
FEATURES
● Splash Proof
● 2 Year Warranty
● Class I Insulation
● IEC-320-C14 Input Inlet
● Optional Output Connector
● Wide Input Voltage 90 to 264VAC, 47~63Hz
● Output Voltage Protection (Crowbar Design)
● Output Voltage Available from 5VDC thru 50VDC
● Input Surge Current, Over Voltage, and Over Load Protection
DTSPU50 Series
60 Watt
Single Output
AC/DC Desktop Power Supply
SPECIFICATIONS: DTSPU50 Series
All specifications are based on 25^oC, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min Nom Max
INPUT (V_in)
Operating Voltage Range
90
264
Input Frequency
47
63
Input Current (Low Line)
Io = Full Load, Vin = 115VAC
1.6
Input Current (High Line)
Io = Full Load, Vin = 230VAC
1.0
Inrush Current (Low Line)
Io = Full Load, 25°C, Cool Start, Vin = 115VAC
12
15
Inrush Current (High Line)
Io = Full Load, 25°C, Cool Start, Vin = 230VAC
26
30
Safety Ground Leakage Current
Io = Full Load, Vin = 240VAC
0.5
0.75
Start-Up Time
Io = Full Load, Vin = 100VAC
0.3
1
2
OUTPUT (V_o)
Output Voltage Range
See Rating Chart
Load Regulation
Vin = 230VAC
5
Line Regulation
Io = Full Load
0.5
1
Output Power
Vin = 90 to 264VAC
0
60
Output Current Range
See Rating Chart
Ripple & Noise (peak to peak)
Full Load, Vin = 90VAC
0.5
1
Transient Response
Io = Full Load to Half Load, Vin = 100VAC
4
Hold-Up Time
Io = Full Load, Vin = 110VAC
16
PROTECTION
Over Voltage Protection
112
132
Over Current Protection
110
150
GENERAL
Switching Frequency
65
Efficiency
Io = Full Load, Vin = 230VAC
75
83
88
Dielectric Withstanding Voltage
For Primary to Secondary
Primary to Secondary
4242
Dielectric Withstanding Voltage
For Primary to Ground
Primary to Ground
2121
Isolation Resistance
Test Voltage = 500VDC
50
ENVIRONMENTAL
Operating Temperature
Derate linearly from 100% Load at 40°C to 50% load at 70°C
0
+70
Storage Temperature
-40
+85
Relative Humidity
5
95
Temperature Coefficient
All Outputs
-0.04
+0.04
PHYSICAL
Weight
Approximately 488 ~ 596
Dimensions
5.75 x 2.99 x 1.69
Warranty
2
SAFETY
EMI Requirements for CISPR-22
Vin = 220VAC
B
EMI Requirements for FCC PART-15
Vin = 110VAC
B
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax [phone]
Unit
VAC
Hz
A
A
A
A
mA
s
VDC
%
%
W
A
%
ms
ms
%
%
KHz
%
VDC
VDC
MΩ
°C
°C
%
%/°C
grams
inches
years
Class
Class