English
Language : 

DTSPU16 Datasheet, PDF (1/3 Pages) Wall Industries,Inc. – 15 Watt Single Output AC/DC Desktop Power Supply
DTSPU16 Series
15 Watt
Single Output
AC/DC Desktop Power Supply
FEATURES
● Splash Proof
● Single Output
● 2 Year Warranty
● Energy Star Compliant
● Optional Output Connectors
● A & C Types: Class I Insulation
● 3 Types of Inlet Connectors Available
● Wide Input Voltage 90 to 264VAC, 47~63Hz
● B Type: Class II Insulation (Double Insulation)
● Output Voltages Available from 3VDC thru 48VDC
Approval not for B Type
SPECIFICATIONS: DTSPU16 Series
All specifications are based on 25oC, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min Nom Max Unit
INPUT (Vin)
Operating Voltage Range
90
264
VAC
Input Frequency
47
63
Hz
Input Current (Low Line)
Io = Full Load, Vin = 115VAC
0.4
A
Input Current (High Line)
Io = Full Load, Vin = 230VAC
0.26
A
Inrush Current (Low Line)
Io = Full Load, 25°C, Cool Start, Vin = 115VAC
12
15
A
Inrush Current (High Line)
Io = Full Load, 25°C, Cool Start, Vin = 230VAC
26
30
A
Safety Ground Leakage Current
Io = Full Load, Vin = 240VAC
0.5
0.75
mA
Start-Up Time
Io = Full Load, Vin = 100VAC
0.3
1
2
s
OUTPUT (Vo)
Output Voltage Range
See Rating Chart
VDC
Load Regulation
Vin = 230VAC
3
10
%
Line Regulation
Io = Full Load
0.5
1
%
Output Power Range
Vin = 90 to 264VAC
15
W
Output Current Range
See Rating Chart
A
*Ripple & Noise (peak to peak)
Full Load, Vin = 90VAC
0.5
1
%
Transient Response
Io = Full Load to Half Load, Vin = 100VAC
4
ms
Hold-Up Time
Io = Full Load, Vin = 110VAC
5
ms
Minimum Load
0
%
PROTECTION
Over Voltage Protection
Nil
%
Over Current Protection
Nil. Output protected to short circuit conditions
%
GENERAL
Efficiency
Io = Full Load, Vin = 230VAC
80
85
%
Dielectric Withstanding Voltage
For Primary to Secondary
Primary to Secondary
4242
VDC
Dielectric Withstanding Voltage
Primary to Ground (For A & C Types Only)
Primary to Ground
2121
VDC
Isolation Resistance
Test Voltage = 500VDC
50
MΩ
Power Consumption (No Load)
No Load, Vin = 240VAC
0
0.4
0.5
W
ENVIRONMENTAL
Operating Temperature
Derate linearly from 100% Load at 40°C to 50% load at 70°C
0
70
°C
Storage Temperature
-40
85
°C
Relative Humidity
5
95
%
Temperature Coefficient
All Outputs
-0.04
+0.04 %/°C
PHYSICAL
Weight
Approximately 165 grams
Dimensions
3.58(L) x 1.50(W) x 1.42(H) inches
Input Inlet
IEC-320-C14, IEC-320-C8, IEC-320-C6
Warranty
2
years
SAFETY
CISPR (EMI Requirements for CISPR-22) Vin = 220VAC
B
Class
FCC (EMI Requirements for FCC Part-15) Vin = 110VAC
B
Class
*Note: The Ripple & Noise for output voltages under 3.3VDC is 2% max.
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797