English
Language : 

DTMPU30 Datasheet, PDF (1/3 Pages) Wall Industries,Inc. – 30 Watts Single, Dual, and Triple Outputs AC/DC Medical Desktop Power Supply
Rev. B
FEATURES
● Splash Proof
● 3 Year Warranty
● Class I Insulation
● IEC-320-C14 Input Inlet
● Optional Output Connectors
● Single, Dual, and Triple Outputs
● Wide Input Voltage 90 to 264VAC, 47~63Hz
● Output Voltage Protection (Crowbar Design)
● Output Voltage Available from 3VDC thru 40VDC
● Input Surge Current, Over Voltage, and Over Load Protection
DTMPU30 Series
30 Watts
Single, Dual, and Triple Outputs
AC/DC Medical Desktop Power Supply
SPECIFICATIONS: DTMPU30 Series
All specifications are based on 25oC, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min Nom Max
INPUT (Vin)
Operating Voltage Range
90
264
Input Frequency
47
63
Input Current (Low Line)
Io = Full Load, Vin = 115VAC
0.9
Input Current (High Line)
Io = Full Load, Vin = 230VAC
0.34
Inrush Current (Low Line)
Io = Full Load, 25°C, Cool Start, Vin = 115VAC
12
15
Inrush Current (High Line)
Io = Full Load, 25°C, Cool Start, Vin = 230VAC
26
30
Safety Ground Leakage Current
Io = Full Load, Vin = 240VAC
0.1
Start-Up Time
Io = Full Load, Vin = 100VAC
0.3
1.5
2
OUTPUT (Vo)
Output Voltage Range
See Rating Chart
Load Regulation
Vin = 230VAC
3
10
Line Regulation
Io = Full Load
0.5
1
Output Power Range
Vin = 90 to 264VAC
0
30
Output Current Range
See Rating Chart
*Ripple & Noise (peak to peak)
Full Load, Vin = 90VAC
0.5
1
Transient Response
Io = Full Load to Half Load, Vin = 100VAC
4
Hold-Up Time
Io = Full Load, Vin = 110VAC
12
Temperature Coefficient
All Outputs
-0.04
+0.04
PROTECTION
Over Voltage Protection
112
132
Over Current Protection
110
150
GENERAL
Efficiency
Io = Full Load, Vin = 230VAC
70
83
85
Dielectric Withstanding Voltage
For Primary to Secondary
Primary to Secondary
5600
Dielectric Withstanding Voltage
For Primary to Ground
Primary to Ground
2800
Isolation Resistance
Test Voltage = 2100VDC
50
ENVIRONMENTAL
Operating Temperature
Derate linearly from 100% Load at 50°C to 50% load at 70°C
0
70
Storage Temperature
-40
85
Relative Humidity
5
95
PHYSICAL
Weight
Approximately 400 ~ 460
Dimensions
4.65 x 2.56 x 1.54
Warranty
3
SAFETY
EMI Requirements for CISPR-11
Vin = 220VAC
B
EMI Requirements for FCC PART-18
Vin = 110VAC
B
*Note: The Ripple & Noise for output voltages under 3.3VDC is 2% max.
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
Unit
VAC
Hz
A
A
A
A
mA
s
VDC
%
%
W
A
%
ms
ms
%/°C
%
%
%
VDC
VDC
MΩ
°C
°C
%
grams
inches
years
Class
Class