DTIPU25 Datasheet, PDF (1/3 Pages) Wall Industries,Inc. – 25 Watt Single Output AC/DC Desktop Power Supply

Rev A
DTIPU25 Series
25 Watt
Single Output
AC/DC Desktop Power Supply
FEATURES
● Splash Proof
● 2 Year Warranty
● B Type: Class II Insulation
● Optional Output Connectors
● A & C Types: Class I Insulation
● 3 Types of Inlet Connectors Available
● Approved as Limited Power Source (LPS)
● Wide Input Voltage 90~264VAC, 47~63Hz
● -20°C~+70°C Operating Temperature Range
Type A
Type B
Type C
DESCRIPTION
The DTIPU25 Series of AC/DC switching mode single output power supplies provides 25 watts of continuous output power. All models have a
single output, universal input voltage range, and an operating temperature range of -20°C ~ +70°C. This series also has three types of AC inlet
connectors to choose from: Type A (IEC-320-C14), Type B (IEC-320-C8), or Type C (IEC-320-C6). All supplies are UL 94V-1 compliant. All models
meet FCC Part-15 class B and CISPR-22 class B emission limits and are designed to comply with UL/cUL (UL 60950-1), TUV/GS (EN 60950-1)
and new CE requirements. All units are Energy Star compliant and 100% burn-in tested.
SPECIFICATIONS: DTIPU25 Series
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min Nom Max
Unit
INPUT (V_in)
Operating Voltage Range
90
264
VAC
Input Frequency
47
63
Hz
Input Current (Low Line)
Io = Full Load, Vin = 115VAC
0.4
A
Input Current (High Line)
Io = Full Load, Vin = 230VAC
0.25
A
Inrush Current (Low Line)
Io = Full Load, 25°C, Cool Start, Vin = 115VAC
12
15
A
Inrush Current (High Line)
Io = Full Load, 25°C, Cool Start, Vin = 230VAC
26
30
A
Safety Ground Leakage Current
(A & C Types Only)
Io = Full Load, Vin = 240VAC
0.5
0.75
mA
Safety Ground Leakage Current
(B Type Only)
Io = Full Load, Vin = 240VAC
0.15
0.25
mA
Start-Up Time
Io = Full Load, Vin = 100VAC
0.25
0.5
s
OUTPUT (V_o)
Output Voltage Range
See Rating Chart
Load Regulation
Vin = 230VAC
1
3
5
%
Line Regulation
Io = Full Load
0.5
1
%
Output Power Range
Vin = 90 to 264VAC
0
25
W
Output Current Range
See Rating Chart
Ripple & Noise (peak to peak)
Full Load, Vin = 90VAC
0.5
1
%
Transient Response Time
Io = Full Load to Half Load, Vin = 100VAC
4
ms
Hold-Up Time
Io = Full Load, Vin = 110VAC
12
14
16
ms
PROTECTION
Over Voltage Protection
Nil
%
Over Current Protection
110
150
%
GENERAL
Efficiency
Io = Full Load, Vin = 230VAC
75
85
95
%
Dielectric Withstanding Voltage
For Primary to Secondary
Primary to Secondary
4242
VDC
Dielectric Withstanding Voltage
For Primary to Ground (A & C Types Only)
Primary to Ground
2121
VDC
Isolation Resistance
Test Voltage = 500VDC
50
MΩ
No Load Power Consumption
No Load, Vin = 240VAC
0
0.4
0.5
W
ENVIRONMENTAL
Operating Temperature
Derate linearly from 100% Load at 40°C to 50% load at 70°C
-20
70
°C
Storage Temperature
-40
85
°C
Relative Humidity
5
95
%
Temperature Coefficient
All Outputs
-0.04
+0.04
%/°C
MTBF
300,000 hours
PHYSICAL
Weight
Approximately 170 grams
Dimensions
A Type: 4.11 x 1.65 x 1.22 inches
B & C Types: 3.90 x 1.65 x 1.22 inches
Input Inlet
IEC-320-C14, IEC-320-C8, IEC-320-C6
Warranty
2 years
SAFETY
CISPR (EMI Requirements for CISPR-22)
Vin = 220VAC
B
Class
FCC (EMI Requirements for FCC Part-15)
Vin = 110VAC
B
Class
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax [phone]