|
DTEM1120 Datasheet, PDF (1/3 Pages) Wall Industries,Inc. – 100 - 130 Watts, AC - DC Medical Desktop Power Supplies | |||
|
Wall Industries, Inc.
Rev B
DTEM1120 SERIES
100~130 Watts, AC/DC Medical Desktop Power Supplies
IEC-320-C14
Size: 7.05 x 2.53 x 1.57 inches
IEC-320-C8
Size: 7.05 x 2.53 x 1.57 inches
IEC-320-C6
Size: 7.05 x 2.53 x 1.57 inches
FEATURES
ï· Single Outputs
ï· Energy Star/CEC Level V Compliant
ï· RoHS & WEEE Compliant
ï· 100~240VAC Input Voltage Range
ï· Short Circuit and Over Voltage Protection
ï· IEC-320-C14, IEC-320-C8, & IEC-320-C6 AC Inlets
ï· UL/cUL 60601, EN 60601-1, & IEC 60601-1 Approvals
ï· Optional Output Connectors Available
DESCRIPTION
The DTEM1120 series of medical AC/DC desktop power supplies provides up to 130 Watts of continuous output power in a 7.05â x 2.53â x 1.57â
package. All models have a single output and a wide input voltage range of 100~240VAC. This series is RoHS, WEEE, and Energy Star/CEC Level V
compliant and has UL/cUL 60601-1, EN 60601-1, and IEC 60601-1 medical approvals. All models are protected against over voltage, over current, and
short circuit conditions. This series also has three AC inlet connector types available: IEC-320-C14, IEC-320-C8, and IEC-320-C6. Optional output
connectors are also available please call factory for ordering details.
MODEL SELECTION TABLE
Model Number (1) Input Voltage Range Output Voltage (2)
Output Current
Min
Max
Ripple & Noise (3) Output Power AC Inlet (1)
DTEM11201A
12 ~ 17 VDC
0A
10A
240mVp-p
120W
DTEM11201B
18 ~ 24 VDC
0A
7A
240mVp-p
130W
DTEM11201C
12 ~ 17 VDC
0A
9.17A
240mVp-p
100 ~ 240 VAC
DTEM11201D
18 ~ 24 VDC
0A
6.5A
240mVp-p
110W
120W
IEC-320-C14
DTEM11201E
12 ~ 17 VDC
0A
8.34A
240mVp-p
100W
DTEM11201F
18 ~ 24 VDC
0A
6.11A
240mVp-p
110W
DTEM11202A
12 ~ 17 VDC
0A
10A
240mVp-p
120W
DTEM11202B
18 ~ 24 VDC
0A
7A
240mVp-p
130W
DTEM11202C
12 ~ 17 VDC
0A
9.17A
240mVp-p
100 ~ 240 VAC
DTEM11202D
18 ~ 24 VDC
0A
6.5A
240mVp-p
110W
120W
IEC-320-C8
DTEM11202E
12 ~ 17 VDC
0A
8.34A
240mVp-p
100W
DTEM11202F
18 ~ 24 VDC
0A
6.11A
240mVp-p
110W
DTEM11203A
12 ~ 17 VDC
0A
10A
240mVp-p
120W
DTEM11203B
18 ~ 24 VDC
0A
7A
240mVp-p
130W
DTEM11203C
12 ~ 17 VDC
0A
9.17A
240mVp-p
100 ~ 240 VAC
DTEM11203D
18 ~ 24 VDC
0A
6.5A
240mVp-p
110W
120W
IEC-320-C6
DTEM11203E
12 ~ 17 VDC
0A
8.34A
240mVp-p
100W
DTEM11203F
18 ~ 24 VDC
0A
6.11A
240mVp-p
110W
NOTES
1. The number in red represents the type of AC inlet connector: â1â is for IEC-320-C14 type, â2â is for IEC-320-C8 type, and â3â is for IEC-320-C6 type.
2. The output voltage is specified as a range (Ex: 18~24VDC); the customer must specify what they want the voltage set at.
3. Ripple and Noise is measured at nominal line and full load with 20MHz bandwidth and a 0.1μF ceramic capacitor and 47μF aluminum capacitors
in parallel across the output.
4. Optional output connectors are available. Please call factory for ordering details.
07/02/2013
Wall Industries, Inc. ⢠5 Watson Brook Road, Exeter, NH 03833 ⢠Tel: 603-778-2300 ⢠Toll Free: 888-597-9255 ⢠Fax 603-778-9797
website: www.wallindustries.com ⢠e-mail: sales@wallindustries.com
Page 1 of 3
|
▷ |