DTEM1024 Datasheet, PDF (1/3 Pages) Wall Industries,Inc. – 16 - 36 Watts Medical AC - DC Desktop Power Supplies

IEC-320-C14
Rev B
IEC-320-C8
DTEM1024 SERIES
16~36 Watts
Medical AC/DC Desktop Power Supplies
IEC-320-C6
IEC-320-C18
Size: 3.94 x 1.77 x 1.22
inches
Size: 3.94 x 1.77 x 1.22 inches
Size: 3.94 x 1.77 x 1.22 inches
Size: 3.94 x 1.77 x 1.22
inches
FEATURES
• Single Outputs
• RoHS & WEEE Compliance
• Efficiency Meets CEC Level V, VI
• Short Circuit & Over Voltage Protection
• IEC-320-C14, IEC-320-C8, IEC-320-C6, & IEC-320-C18 • 100~240VAC Input Voltage Range
AC Inlets Available
• MTBF > 30,000 Hours
• UL/cUL 60601: 3rd Edition Medical Approvals
• Optional Output Connectors Available
• TUV/SUD EN/IEC 606001 approvals for Class II
• CB, CE, FCC approvals
DESCRIPTION
The DTEM1024 series of medical AC/DC desktop power supplies provides up to 36 Watts of continuous output power in a 3.94” x 1.77” x 1.22”
package. All models have a single output and a wide input voltage range of 100~240VAC. This series is RoHS and WEEE compliant and meets
CEC Level V, VI requirements. This series also has UL/cUL 60601 and TUV/SUD EN/IEC 60601 3rd edition (for class II) medical approvals. All
models are protected against short circuit and over voltage conditions. Four AC inlet connector types are available for this series: IEC-320-C14,
IEC-320-C8, IEC-320-C6, and IEC-320-C18. Optional output connectors are also available please call factory for ordering details.
Model Number ⁽¹⁾
DTEM1024Ax
DTEM1024Bx
DTEM1024Cx
DTEM1024Dx
DTEM1024Ex
DTEM1024Fx
DTEM1024Gx
DTEM1024Hx
DTEM1024Jx
DTEM1024Kx
DTEM1024Mx
DTEM1024Nx
DTEM1024Px
DTEM1024Qx
DTEM1024Rx
Input Voltage
Range
100 ~ 240 VAC
MODEL SELECTION TABLE
Output Voltage ⁽²⁾
5 ~ 8 VDC
5 ~ 8 VDC
5 ~ 8 VDC
Output Current
Min
Max
0A
2.0A
0A
3.0A
0A
4.0A
Load
Regulation
±5%
±5%
±5%
9 ~ 11 VDC
0A
1.5A
±5%
9 ~ 11 VDC
0A
2.0A
±5%
9 ~ 11 VDC
12 ~ 17 VDC
0A
3.0A
±5%
0A
1.66A
±5%
12 ~ 17 VDC
0A
2.5A
±5%
18 ~ 24 VDC
0A
1.33A
±5%
18 ~ 24 VDC
0A
1.66A
±5%
36 ~ 48 VDC
36 ~ 48 VDC
12V
12V
24V
0A
0.55A
±5%
0A
0.83A
±5%
0A
3.0A
±5%
0A
2.0A
±5%
0A
1.5A
±5%
Line
Regulation⁽³⁾
Ripple & Noise ⁽⁴⁾
Output Power
±1%
±1%
±1%
100mVp-p
100mVp-p
100mVp-p
16W
20W
24W
±1%
250mVp-p
18W
±1%
250mVp-p
24W
±1%
±1%
250mVp-p
250mVp-p
27W
20W
±1%
250mVp-p
30W
±1%
350mVp-p
24W
±1%
350mVp-p
30W
±1%
±1%
±1%
±1%
±1%
480mVp-p
480mVp-p
250mVp-p
250mVp-p
350mVp-p
20W
30W
36W
24W
36W
NOTES
1. The “x” in the model number represents the type of AC inlet connector: “x” can be “1” for IEC-320-C14 type, “2” for IEC-320-C8 type, “3” for IEC-
320-C6, or “6” for IEC-320-C18 type.
2. The output voltage is specified as a range (Ex: 36~48 VDC); the customer must specify what they want the voltage set at.
3. Line regulation is defined by changing ±10% of input voltage from nominal line at rated load.
4. Ripple and Noise is measured at nominal line and full load with 20MHz bandwidth and a 0.1µF ceramic capacitor and 47µF aluminum
capacitors in parallel across the output.
5. LED option available.
6. Optional output connectors are available. Please call factory for ordering details.
09/22/2014
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: [phone] • Toll Free: 888-597-9255 • Fax 603-778-
9797
website: www.wallindustries.com • e-mail: [e-mail]
Page 1 of 3