DMW24S33-3000 Datasheet, PDF (1/9 Pages) Wall Industries,Inc. – Single and Dual Output 15 Watt DC/DC Converter 4:1 Ultra Wide Input Voltage Range

DMW Ultra Wide Series
Single and Dual Output
15 Watt DC/DC Converter
4:1 Ultra Wide Input Voltage Range
FEATURES
● 1500VDC Isolation
● Efficiency up to 86%
● Six-Sided Shielding
● MTBF>700,000 Hours
● Remote On/Off Control
● UL1950 Safety Approval
● Internal SMT Construction
● 4:1 Ultra Wide Input Range
● UL 94V-0 Package Material
● Complies with EN55022 Class A
SPECIFICATIONS: DMW Ultra Wide Series
All specifications are based on 25^oC, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min Nom Max Unit
INPUT (V_in)
Operating Voltage Range
9-36, 18-75
VDC
Start Voltage (24V input models)
8
8.5
9
VDC
Start Voltage (48V input models)
15
17
18 VDC
Under Voltage Shutdown (24V input models)
7
8
8.5 VDC
Under Voltage Shutdown (48V input models)
13
15
17 VDC
Reverse Polarity Input Current
1
A
Short Circuit Input Power
3500
mW
Input Surge Voltage (1000ms) (24V input models)
-0.7
50 VDC
Input Surge Voltage (1000ms) (48V input models)
-0.7
100 VDC
Input Filter
Pi Filter
OUTPUT (V_o)
Output Voltage Range
See Rating Chart
Output Voltage Accuracy
±1.0
±2.0 %
Output Voltage Balance
Dual Output, Balanced Loads
±0.5
±2.0 %
Load Regulation
Io = 10% to 100%
±0.5
±1.0 %
Line Regulation
Vin = min. to max.
±0.1
±0.5 %
Output Power
15 W
Output Current Range
See Rating Chart
Ripple & Noise (peak to peak)
Ripple & Noise (peak to peak)
Ripple & Noise
20MHz
Over Line, Load, and Temperature
55
80
mV_pk-pk
100
mV_pk-pk
15 mVrms
Transient Recovery Time
25% load step change
300
500 µs
Transient Response Deviation
25% load step change
±2
±4 %
REMOTE ON/OFF
Supply On
2.5 to 5.5VDC or Open Circuit
Supply Off
-0.7
0.8 VDC
Standby Input Current
10 mA
Control Input Current (On)
Vin – RC = 5.0V
50 mA
Control Input Current (Off)
Vin – RC = 0V
-1 mA
Control Common
Referenced to negative input
PROTECTION
Over Power Protection
120
%
Short Circuit Protection
Continuous
Input Fuse Recommendation (24V input models)
2500mA Slow-Blow Type
Input Fuse Recommendation (48V input models)
1250mA Slow-Blow Type
GENERAL
Efficiency
See Rating Chart
Switching Frequency
290
330
400 KHz
Isolation Voltage Rated
60 seconds
1500
VDC
Isolation Voltage Test
Flash Test for 1 second
1650
VDC
Isolation Resistance
500VDC
1000
MΩ
Isolation Capacitance
100KHz, 1V
1200 1500 pF
Internal Power Dissipation
5,000 mW
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax [phone]