DCSD-25 Datasheet, PDF (1/3 Pages) Wall Industries,Inc. – 25 Watt Single Output Chassis Mount DC/DC Converter

DCSD-25 Series
25 Watt
Single Output
Chassis Mount DC/DC Converter
FEATURES
● 105°C Output Capacitor
● Low Cost, High Reliability
● Compact Size, Light Weight
● 100% Full Load Burn-In Tested
● Built-In EMI Filter, Low Ripple Noise
● High Efficiency, Low Working Temperature
● Short Circuit, Overload, and Over Voltage Protected
SPECIFICATIONS: DCSD-25 Series
All specifications are based on 25^oC, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
INPUT SPECIFICATIONS
Input Voltage
DCSD-25A: 9.2 ~ 18VDC
DCSD-25B: 19 ~ 36VDC
DCSD-25C: 36 ~ 72VDC
Input Current
DCSD-25A: 3.2A at 12VDC
DCSD-25B: 1.6A at 24VDC
DCSD-25C: 0.8A at 48VDC
OUTPUT SPECIFICATIONS
Output Voltage
See Table
Output Voltage Tolerance (See Note 3)
5V outputs: ±2%
12V & 24V outputs: ±1%
Voltage Adjustability
See Table
Output Current
See Table
Line Regulation
5V outputs: ±0.5%
12V outputs: ±0.3%
24V outputs: ±0.2%
Load Regulation
5V outputs: ±0.5%
12V outputs: ±0.3%
24V outputs: ±0.2%
Ripple & Noise
5V outputs: 100mVp-p
12V outputs: 120mVp-p
24V outputs: 150mVp-p
Output Power
See Table
Setup, Rise Time
2.5s, 50ms
PROTECTION
Over Voltage Protection
5V outputs: 5.75 ~ 6.75V / 10% Load
12V outputs: 16.8 ~ 20V / 10% Load
24V outputs: 31.5 ~ 37.5V / 10% Load
Over Load Protection
105%~150% Type: Foldback Current Limiting Reset: Auto recovery.
GENERAL SPECIFICATIONS
Efficiency
See Table
Withstand Voltage
1.5KVAC (input to output), 1.5KVAC (input to FG), 0.5KVAC (output to FG)
Isolation Resistance
500VDC / 100MΩ (input to output, input to FG, output to FG)
ENVIRONMENTAL SPECIFICATIONS
Working Temperature
-10°C to +60°C (refer to output derating curve)
Storage Temperature
-20°C to +85°C
Working Humidity
20% to 90% RH
Storage Humidity
10% to 95% RH
Vibration
10~500Hz, 2G 10min./1cycle, Period for 60min. each axes
Temperature Coefficient
±0.03%/°C (0°C~50°C)
PHYSICAL SPECIFICATIONS
Weight
360 grams
Dimensions
99(L) x 97(W) x 35(H) mm
SAFETY & EMC
EMC Standards
EN55022 CLASS B (Radiation), EN61000-4-2,3,4,6,8 ENV50204 Verification
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax [phone]