DCSD-150 Datasheet, PDF (1/3 Pages) Wall Industries,Inc. – 150 Watt Single Output Chassis Mount DC/DC Converter

DCSD-150 Series
150 Watt
Single Output
Chassis Mount DC/DC Converter
FEATURES
● 105°C Output Capacitor
● Low Cost, High Reliability
● Compact Size, Light Weight
● 100% Full Load Burn-In Tested
● Built-In EMI Filter, Low Ripple Noise
● High Efficiency, Low Working Temperature
● Short Circuit, Overload, and Over Voltage Protected
(for 24V and 48V input types)
SPECIFICATIONS: DCSD-150 Series
All specifications are based on 25^oC, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
INPUT SPECIFICATIONS
Input Voltage
DCSD-150B: 19 ~ 36VDC
DCSD-150C: 36 ~ 72VDC
DCSD-150D: 72 ~ 144VDC or 85~132VAC
Input Current
DCSD-150B: 8.5A at 24VDC
DCSD-150C: 4.2A at 48VDC
DCSD-150D: 2.1A at 96VDC
Inrush Current
DCSD-150D: 25A at 96VDC
Leakage Current
DCSD-150D: <0.75mA at 120VAC
OUTPUT SPECIFICATIONS
Output Voltage
See Table
Output Voltage Tolerance (See Note 3)
±1%
Voltage Adjustability
See Table
Output Current
See Table
Line Regulation
Load Regulation
12V outputs: ±0.5%
24V outputs: ±0.3%
12V outputs: ±0.5%
24V outputs: ±0.3%
Ripple & Noise
12V outputs: 120mVp-p
24V outputs: 150mVp-p
Output Power
See Table
Setup, Rise, Hold Up Time
DCSD-150D (only): 2s, 50ms, 10ms/20ms
PROTECTION
Over Voltage Protection
12V outputs: 16.8 ~ 20V / 10% Load
24V outputs: 31.5 ~ 37.5V / 10% Load
Over Load Protection
105%~135% Type: Foldback Current Limiting Reset: Auto recovery.
GENERAL SPECIFICATIONS
Efficiency
See Table
Withstand Voltage
1.5KVAC (input to output), 1.5KVAC (input to FG), 0.5KVAC (output to FG)
Isolation Resistance
500VDC / 100MΩ (input to output, input to FG, output to FG)
ENVIRONMENTAL SPECIFICATIONS
Working Temperature
-10°C to +60°C (refer to output derating curve)
Storage Temperature
-20°C to +85°C
Working Humidity
20% to 90% RH
Storage Humidity
10% to 95% RH
Vibration
10~500Hz, 2G 10min./1cycle, Period for 60min. each axes
Temperature Coefficient
±0.03%/°C (0°C~50°C)
PHYSICAL SPECIFICATIONS
Weight
850 grams
Dimensions
199(L) x 110(W) x 50(H) mm
SAFETY & EMC
EMC Standards
EN55022 CLASS B (Radiation), EN61000-4-2,3,4,6,8 ENV50204 Verification for DCSD-150B/C
Series only, not including DCSD-150D series.
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax [phone]