DCSD-100 Datasheet, PDF (1/3 Pages) Wall Industries,Inc. – 100 Watt Single Output Chassis Mount DC/DC Converter

DCSD-100 Series
100 Watt
Single Output
Chassis Mount DC/DC Converter
FEATURES
● 105°C Output Capacitor
● Low Cost, High Reliability
● Compact Size, Light Weight
● 100% Full Load Burn-In Tested
● Built-In EMI Filter, Low Ripple Noise
● High Efficiency, Low Working Temperature
● Short Circuit, Overload, and Over Voltage Protected
(for 24V and 48V input types)
SPECIFICATIONS: DCSD-100 Series
All specifications are based on 25^oC, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
INPUT SPECIFICATIONS
Input Voltage
DCSD-100B: 19 ~ 36VDC
DCSD-100C: 36 ~ 72VDC
DCSD-100D: 72 ~ 144VDC or 85~132VAC
AC Current
5V outputs: 6A at 24VDC
12V outputs: 3A at 48VDC
24V outputs: 1.5A at 96VDC
Inrush Current
DCSD-100D: 20A at 96VDC
Leakage Current
DCSD-100D: < 0.75mA at 120VAC
OUTPUT SPECIFICATIONS
Output Voltage
See Table
Output Voltage Tolerance (See Note 3)
5V outputs: ±2%
12V & 24V outputs: ±1%
Voltage Adjustability
See Table
Output Current
See Table
Line Regulation
Load Regulation
5V outputs: ±0.5%
12V outputs: ±0.3%
24V outputs: ±0.2%
5V outputs: ±0.5%
12V outputs: ±0.3%
24V outputs: ±0.2%
Ripple & Noise
See Table
Output Power
See Table
Setup, Rise, Hold Up Time
DCSD-100D (only): 2s, 50ms, 20ms
PROTECTION
Over Voltage Protection
5V outputs: 5.75 ~ 6.75V / 10% Load
12V outputs: 16.8 ~ 20V / 10% Load
24V outputs: 31.5 ~ 37.5V / 10% Load
Over Load Protection
105%~135% Type: Foldback Current Limiting Reset: Auto recovery.
GENERAL SPECIFICATIONS
Efficiency
See Table
Withstand Voltage
1.5KVAC (input to output), 1.5KVAC (input to FG), 0.5KVAC (output to FG)
Isolation Resistance
500VDC / 100MΩ (input to output, input to FG, output to FG)
ENVIRONMENTAL SPECIFICATIONS
Working Temperature
-10°C to +60°C (refer to output derating curve)
Storage Temperature
-20°C to +85°C
Working Humidity
20% to 90% RH
Storage Humidity
10% to 95% RH
Vibration
10~500Hz, 2G 10min./1cycle, Period for 60min. each axes
Temperature Coefficient
±0.03%/°C (0°C~50°C)
PHYSICAL SPECIFICATIONS
Weight
600 grams
Dimensions
199(L) x 98(W) x 38(H) mm
SAFETY & EMC
EMC Standards
EN55022 CLASS B (Radiation), EN61000-4-2,3,4,6,8 ENV50204 Verification for DCSD-100B/C
Series only, not including DCSD-100D series.
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax [phone]