DCMJU10 Datasheet, PDF (1/6 Pages) Wall Industries,Inc. – 10 Watt DC/DC Power Converters

Wall Industries, Inc.
Rev A
DCMJU10 SERIES
10 Watt DC/DC Power Converters
FEATURES
• RoHS Compliant
• Up to 10 Watts Output Power
• Single & Dual Outputs
• Remote On/Off Control
• 1500VDC I/O Isolation
• High Efficiency up to 87%
• 1.0” x 1.0” x 0.4” Package Size
• 4:1 Ultra Wide Input Voltage Ranges
• Shielded Metal Case with Isolated Base-plate
• -40°C to +80°C Operating Temperature Range
• Over Load & Short Circuit Protection
• UL/IEC/EN 60950-1 Safety Approvals (Pending)
• Input Filter Complies to EN55022, Class A & FCC, Level A
• Heatsink (Optional)
Size:
1.0 x 1.0 x 0.4 inches
25.4 x 25.4 x 10.16 mm
Weight:
0.53oz (15g)
Applications:
• Battery Operated Equipment
• Instrumentation
• Distributed Power Architectures
• Communication & Industrial Electronics
DESCRIPTION
The DCMJU10 series of DC/DC power converters offers 10 Watts of output power in a 1.0” x 1.0” x 0.4”
shielded metal package with an industry standard pin-out. This series consists of single and dual
output models with a 4:1 ultra wide input voltage range and tight output voltage regulation. State-
of-the-art circuit topology provides a very high efficiency up to 87% and an operating temperature
range of -40°C to +80°C. Further features include remote on/off control, 1500VDC I/O isolation, and
over load and short circuit protection. These converters are RoHS compliant and are ideal for use in
battery operated equipment, instrumentation, distributed power architectures in communication
and industrial electronics and many other space critical applications.
Model Number
DCMJU24S33-10
DCMJU24S05-10
DCMJU24S51-10
DCMJU24S12-10
DCMJU24S15-10
DCMJU24S24-10
DCMJU48S33-10
DCMJU48S05-10
DCMJU48S51-10
DCMJU48S12-10
DCMJU48S15-10
DCMJU48S24-10
Input Voltage
24 VDC
(9 - 36 VDC)
48 VDC
(18 - 75 VDC)
Model Number
DCMJU24D05-10
DCMJU24D12-10
DCMJU24D15-10
DCMJU48D05-10
DCMJU48D12-10
DCMJU48D15-10
Input Voltage
24 VDC
(9 - 36 VDC)
48 VDC
(18 - 75 VDC)
Output
Voltage
3.3 VDC
5 VDC
5.1 VDC
12 VDC
15 VDC
24 VDC
3.3 VDC
5 VDC
5.1 VDC
12 VDC
15 VDC
24 VDC
Output
Voltage
±5 VDC
±12 VDC
±15 VDC
±5 VDC
±12 VDC
±15 VDC
MODEL SELECTION TABLE
SINGLE OUTPUT MODELS
Output Current
Input Current
Min ⁽¹⁾
Max
No Load Max Load
330mA
2200mA
352mA
300mA
2000mA
496mA
300mA
125mA
2000mA
830mA
30mA
506mA
483mA
100mA
660mA
474mA
62mA
410mA
477mA
330mA
2200mA
180mA
300mA
2000mA
248mA
300mA
125mA
2000mA
830mA
20mA
253mA
241mA
100mA
660mA
237mA
62mA
410mA
238mA
DUAL OUTPUT MODELS
Output Current
Input Current
Min ⁽¹⁾
Max
No Load Max Load
±150mA ±1000mA
496mA
±62mA ±410mA
30mA
477mA
±50mA ±330mA
474mA
±150mA ±1000mA
248mA
±62mA ±410mA
20mA
238mA
±50mA ±330mA
237mA
Output
Power
7.26W
10W
10.2W
10W
10W
9.84W
7.26W
10W
10.2W
10W
10W
9.84W
Output
Power
10W
9.84W
10W
10W
9.84W
10W
Efficiency
86%
84%
84%
86%
87%
86%
85%
84%
84%
86%
87%
86%
Maximum
Capacitive Load
560µF
560µF
560µF
150µF
150µF
68µF
560µF
560µF
560µF
150µF
150µF
68µF
Efficiency
84%
86%
87%
84%
86%
87%
Maximum
Capacitive Load
±220µF
±100µF
±100µF
±220µF
±100µF
±100µF
NOTES
1. The DCMJU10 series requires a minimum output loading to maintain specified regulations. Operation under no-load conditions will not damage
these devices; however they may not meet all listed specifications.
2. Transient recovery time is measured to within 1% error band for a step change in output load from 75% to 100%.
3. All DC/DC converters should be externally fused at the front end for protection.
4. To order the converter with a heatsink, please add the suffix “HS” to the model number. (Ex: DCMJU24S12-10HS)
5. Other input and output voltages may be available; please call factory for ordering details.
11/27/2013
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: [phone] • Toll Free: 888-597-9255 • Fax [phone]
website: www.wallindustries.com • e-mail: [e-mail]
Page 1 of 6