STDA25C-SERIES Datasheet, PDF (2/2 Pages) Vitec Power – 25W Desktop Power Supply for I.T. Equipment

Conditions
Parameter
Test Conditions
Operating Temperature
Storage Temperature
Relative Humidity
Operation temperature at 25°C, calculated per MIL-HDBK-217F
Derate linearly from 100% load at 40°C to 50% load at 70°C
Min.
0
-40
5
0.3M
Approvals and Compliance
Parameter
Test Conditions
Dielectric Withstanding Voltage for Primary to secondary
Primary to secondary
Dielectric Withstanding Voltage for Primary to Ground
Primary to ground
Isolation Resistance
Test Voltage = 500VDC
EMI requirements for CISPR-22
Vin=220VAC
EMI requirements for FCC PART-15
Vin=110VAC
Mechanical and PIN out
Typ.
Max.
Unit
40
70
°C
85
°C
95
%
Hrs
Min.
4242
2121
50
B
B
Unit
VDC
VDC
MΩ
CLASS
CLASS
Note:
1. Dimensions are shown in mm & inch
2. Weight: approx. 170g
(Exclude the input cord)
3. Optional output connector.