SMFA80-SERIES Datasheet, PDF (2/2 Pages) Vitec Power – 80W Open-Frame Power Supply for Medical Equipment

Conditions
Parameter
Test Conditions
Operating Temperature
Storage Temperature
Relative Humidity
Operating Temperature at 25°C, Calculated per MIL-HDBK-217F
De-rate linearly from 100% load at 50°C to 50% load at 70°C
Min.
0
-40
5
0.1M
Approvals and Compliances
Parameter
Dielectric Withstanding Voltage for Primary to secondary
Dielectric Withstanding Voltage for Primary to Ground
Isolation Resistance
EMI requirements for CISPR-11
EMI requirements for FCC PART-18
Test Conditions
Primary to secondary
Primary to ground
Test Voltage = 500VDC
Vin=220VAC
Vin=110VAC
Mechanical and PIN out
Typ.
Max.
Unit
50
70
°C
85
°C
95
%
Hrs
Min.
5656
2828
50
B
B
Unit
VDC
VDC
MΩ
CLASS
CLASS
PIN CHART
MODEL
PIN _{1 2 3 4 5 6 7 8 9 10 11 12}
SMFA80-SXX-12pin RTN RTN RTN RTN RTN RTN Vout Vout Vout Vout Vout Vout
MODEL
PIN _{1 2 3 4 5 6}
SMFA80-SXX-6pin RTN RTN RTN Vout Vout Vout
Note:
1. Dimensions are shown in mm.
2. Weight: 420g approx.
3. Input connector mates with Molex housing
09-50-3031 and Molex 2478 series crimp terminal
4. Output connector mates with screw terminal
(Terminal Block)(16-22AWG) or Molex housing
09-50-3121and Molex 2478 series crimp terminal