SIFA61-SERIES Datasheet, PDF (2/3 Pages) Vitec Power – 63W Open Frame Power Supply for Industrial Equipment

SIFA61-Q02-2
SIFA61-Q02-3
SIFA61-Q03
SIFA61-Q03-1
SIFA61-Q03-2
SIFA61-Q03-3
SIFA61-Q04
SIFA61-Q04-1
SIFA61-Q04-2
SIFA61-Q04-3
+5V 1.2A 6A 5% +12V 0.6A 3A 5% +12V 0A 0.8A 5% -12V 0A 0.8A 5%
63W
+5V 1.2A 6A 5% +12V 0.6A 3A 5% +12V 0A 0.8A 5% +12V 0A 0.8A 5%
63W
+5V 1.2A 6A 5% +12V 0.6A 3A 5% -12V 0A 0.8A 5% -24V 0A 0.8A 5%
63W
+5V 1.2A 6A 5% +12V 0.6A 3A 5% -12V 0A 0.8A 5% +24V 0A 0.8A 5%
63W
+5V 1.2A 6A 5% +12V 0.6A 3A 5% +12V 0A 0.8A 5% -24V 0A 0.8A 5%
63W
+5V 1.2A 6A 5% +12V 0.6A 3A 5% +12V 0A 0.8A 5% +24V 0A 0.8A 5%
63W
+5V 0.6A 6A 5% +15V 0.3A 3A 5% -15V 0A 0.8A 5% -5V 0A 0.8A 5%
63W
+5V 0.6A 6A 5% +15V 0.3A 3A 5% -15V 0A 0.8A 5% +5V 0A 0.8A 5%
63W
+5V 0.6A 6A 5% +15V 0.3A 3A 5% +15V 0A 0.8A 5% -5V 0A 0.8A 5%
63W
+5V 0.6A 6A 5% +15V 0.3A 3A 5% +15V 0A 0.8A 5% +5V 0A 0.8A 5%
63W
Parameter
Electrical Characteristics
Test Conditions
Input Voltage
Universal Input Voltage
Operating Voltage
Input Frequency
Output Power Range
Vin=Operating Voltage
Input Current (Low Line)
Io=Full load, Vin=115VAC
Input Current (High Line)
Io=Full load, Vin=230VAC
Low Line Inrush Current
Io=Full load, 25°C,Cool start, Vin=115VAC
High Line Inrush Current
Io=Full load, 25°C,Cool start, Vin=230VAC
Efficiency
Io=Full load, Vin=230VAC
Line Regulation
Io=Full load
Load Regulation
Vin=230VAC
Over Voltage Protection
Over Current Protection
Transient Response
Io=Full load to Half Load, Vin=S00VAC
Hold-Up Time
Io=Full load, Vin=1S0VAC
Start Up Time
Io=Full load, Vin=S00VAC
* Ripple & Noise (Peak to Peak)
Full load, Vin=90VAC
Safety Ground Leakage Current
Io=Full load, Vin=240VAC
Temperature Coefficient
All output
* Note: The Ripple & Noise which is under 3.3VDC at 2% max
Conditions
Parameter
Test Conditions
Operating Temperature
Storage Temperature
Relative Humidity
Operating Temperature at 25°C, Calculated per MIL-HDBK-217F
De-rate linearly from 100% load at 50°C to 50% load at 70°C
Min.
Typ.
90
106
81
90
47
0
12
26
70
80
0.5
3
112
110
16
0.3
1
0.5
0.4
-0.05
Min.
Typ.
-20
50
-40
5
0.1M
Max.
264
350
280
420
400
63
1.6
0.8
15
30
88
1
7
132
150
5
2
1
0.45
0.05
Max.
70
85
95
Approvals and Compliances
Parameter
Dielectric Withstanding Voltage for Primary to secondary
Dielectric Withstanding Voltage for Primary to Ground
Isolation Resistance
EMI requirements for CISPR-22
EMI requirements for FCC PART-15
Test Conditions
Primary to secondary
Primary to ground
Test Voltage=500VDC
Vin=220VAC
Vin=110VAC
Mechanical and PIN Out
Min.
4242
2121
50
B
B
PIN CHART
MODEL ^{PIN 1}
2
3
4
5
SIFA61-SXX
OUT OUT OUT RTN RTN
SIFA61-DXX
Vo2 Vo1 COM N/C N/C
SIFA61-D15
N/C Vo1 COM Vo3 N/C
SIFA61-TXX
SIFA61-QXX
Vo2 Vo1 COM Vo3 N/C
Vo2 Vo1 COM Vo3 Vo4
PFD (Optional)
Other Connector
1
2
OUT RTN
OUT RTN
OUT RTN
OUT RTN
OUT RTN
Note:
1.Dimensions are shown in mm.
2.Weight: 300gs approx.
3.Input connector mates with screw terminal
(DINKLE#ESK750V-03P)(10-24AWG)
4.Output connector mates with screw terminal
(DINKLE#ESK750V-05P)(10-24AWG)
Unit
VAC
VAC
VAC
VAC
Hz
W
A
A
A
A
%
%
%
%
%
mS
mS
S
%
mA
%/°C
Unit
°C
°C
%
Hrs
Unit
VDC
VDC
MΩ
CLASS
CLASS