STDA65 Datasheet, PDF (1/2 Pages) Vitec Power – 80W Desktop Power Supply for I.T. Equipment

STDA65 SERIES
80W Desktop Power Supply for I.T. Equipment
– Wide Input Voltage 90 to 264 VAC, 47 to 63Hz
– IEC-320-C14 input inlet
– Output Voltage Available From 3VDC Thru 48VDC
– Single to Quad Output
– Input Surge Current, Over Voltage, Over Load and Output Voltage protection.
– Splash Proof
– Class I Insulation
– High Efficiency, RoHS compliance
2 Year Warranty
Approvals:
Single Output
Model Number
STDA65-S01
STDA65-S02
STDA65-S03
STDA65-S04
STDA65-S05
STDA65-S06
STDA65-S07
STDA65-S08
STDA65-S09
STDA65-S10
STDA65-S11
Output Voltage
3 ~ 5 VDC
5 ~ 6 VDC
6 ~ 8 VDC
8 ~ 11 VDC
11 ~ 13 VDC
13 ~ 16 VDC
16 ~ 21 VDC
21 ~ 27 VDC
27 ~ 33 VDC
33 ~ 40 VDC
40 ~ 48 VDC
Output Current
16.6 ~ 10.0 A
13.0 ~ 10.8 A
11.6 ~ 8.70 A
9.37 ~ 6.81 A
7.27 ~ 6.15 A
6.15 ~ 5.00 A
5.00 ~ 3.80 A
3.80 ~ 2.96 A
2.96 ~ 2.42 A
2.42 ~ 2.00 A
2.00 ~ 1.66 A
Total Regulation
7%
7%
5%
5%
5%
5%
5%
5%
5%
5%
5%
Maximum Output Power
50W
65W
69.6W
75W
80W
80W
80W
80W
80W
80W
80W
Multi Output
Model
Output 1
Output 2
Output 3
Output 4
Maximum
Number
Vonom Iomin Iomax Regmax Vonom Iomin Iomax Regmax Vonom Iomin Iomax Regmax Vonom Iomin Iomax Regmax ^{Output Power}
STDA65-D00
+3.3V 0.7A 7A 7% +12V 0.55A 2.75A 5%
56.1W
STDA65-D01
+5V 0.7A 7A 5% +12V 0.6A 3A 5%
65W
STDA65-D02
+5V 1.4A 7A 5% +15V 0.6A 3A 7%
65W
STDA65-D03
+5V 1.4A 7A 5% +24V 0.3A 2A 5%
65W
STDA65-D04
+3.3V 1.4A 7A 7% +5V 0.6A 3A 5%
38.1W
STDA65-D15
+5V 1.4A 7A 5%
-24V 0.4A 2A 5%
65W
STDA65-T00
+3.3V 1.4A 7A 7% +12V 0.6A 3A 5% -12V 0.1A 0.8A 5%
65W
STDA65-T01
+5V 0.6A 6A 5% +12V 0.3A 3A 5% -5V 0A 0.8A 5%
65W
STDA65-T02
+5V 0.6A 6A 5% +12V 0.3A 3A 5% -12V 0A 0.8A 5%
65W
STDA65-T03
+5V 0.6A 6A 5% +15V 0.3A 3A 5% -15V 0A 0.8A 5%
65W
STDA65-T04
+5V 0.7A 7A 5% +24V 0.2A 2A 5% -24V 0A 0.8A 5%
65W
STDA65-T05
+5V 0.6A 6A 5% +24V 0.2A 2A 5% -12V 0A 0.8A 5%
65W
STDA65-T06
+3.3V 0.7A 7A 7% +12V 0.6A 3A 5% -5V 0A 0.8A 5%
63.1W
STDA65-403
+5V 0A 3.5A 5% +24V 0.1A 1.5A 5% +12V 0A 0.25A 5% -12V 0A 0.15A 5%
65W
S01, D15 is not approved by TUV-PSE.
The model number of S05,S07 had been approved by KC.
The model number of S05 had been approved by CEC level IV.
Conditions
Parameter
Test Conditions
Operating Temperature
Storage Temperature
Relative Humidity
Operating Temperature at 25°C, Calculated per MIL-HDBK-217F
De-rate linearly from 100% load at 40°C to 50% load at 70°C
Min.
Typ.
Max.
Unit
0
40
70
°C
-40
85
°C
5
95
%
0.1M
Hrs