SPU130-101 Datasheet, PDF (1/2 Pages) Volgen Kaga Electronics Inc. – 130W Desk Top Switching Power Supplies For I.T.E.

SPU130 SERIES
130W Desk Top Switching Power Supplies For I.T.E.
Description:
The SPU130 series of AC/DC switching mode power
supplies provide 130 Watts of continuous output power. All
supplies are UL 94V-0 compliant, include IEC-320-C14
input for worldwide applications. All models meet FCC class
B and CISPR class B emission Limits and are designed to
comply with UL, C-UL and CE requirements. All units are
100% burned in and tested.
Features:
+ Wide Input Voltage 90 to 264 VAC,47 to 63 Hz
+ IEC-320-C14 Input Inlet
+ Output Voltage Available From 3 VDC Thru 55 VDC
+ Optional Output Connectors (See appendix)
+ Single and Dual Output
+ Input Surge Current, Over Voltage and Over Load
protection
+ One year warranty
Electrical Characteristics:
Safety Approvals :
CB
Sym.
Parameter
Test Conditions
Min. Typ. Max. Unit
Vin Input Voltage
90
264 VAC
Fin Input Frequency
47
63 Hz
Wo Output Power Range
Vin=90 to 264VAC
0
130 W
Vo Output Voltage Range
See rating chart V
Io Output Current Range
See rating chart A
Iil Input Current (Low Line)
Io=Full load, Vin=11 5VAC
3.2 A
Iih Input Current (High Li ne)
Io=Full load, Vin=23 0 VAC
1.7 A
Irl Low Line Inrush Current
Irh High Line Inrush Current
Eff Efficiency
Io=Full load, 25°c ,Cool start,
Vin=115VAC
Io=Full load, 25°c, Cool start,
Vin=230VAC
Io=Full Load, Vin=23 0VAC
15 30
A
30 60
A
80
%
REG-i Line Regulation
Io=Full Load
0.5 1
%
REG-o Load Regulation
Vin=230VAC
35
%
OVP Over Voltage Protection
112
132 %
OCP Over Current Protection
110
150 %
Ttr Transient Response
Io=Full Load to Half Load, Vin=100VAC
4
mS
Thold Hold-Up Time
Io=Full Load, Vin=10 0VAC
16
mS
Ts Start Up Time
Io=Full Load, Vin=10 0VAC
0.3 1 2
S
Vrn Ripple & Noise (Peak to Peak) Full Load, Vin=90VAC
0.5 1
%
Ilk Safety Ground Leakage Current Io=Full Load, Vin=24 0VAC
0.5 0.75 mA
Tc Temperature Coefficient
All output
-0.04
0.04 %/°c
PFC Power Factor Correction
Optional
0.3
0.99
Environmental :
Sym.
Parameter
Test Conditions
Toper Operating Temperature
Tstg Storage Temperature
Hr Relative Humidity
Pd Derated From 100% at +50°c Linearly to 50% at 70 °c
Min. Typ. Max.
0
70
-40
85
5
95
Unit
°c
°c
%