MT5A-1233SI Datasheet, PDF (1/2 Pages) Volgen Kaga Electronics Inc. – FIXED SWITCHING FREQUENCY

Kaga Electronics (USA) Inc.
2480 N. First St, Suite #100
San Jose, CA 95131
Tel: [phone] Fax: [phone]
www.volgen.com
5 WATTS OUTPUT POWER
2:1 AND 4:1 WIDE INPUT VOLTAGE RANGE
FIVE-SIDED SHIELD
HIGH EFFICIENCY UP TO 84%
STANDARD 24 PIN DIP PACKAGE
FIXED SWITCHING FREQUENCY
T E C H N I C A L S P E C I F I C A T I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted
OUTPUT SPECIFICATIONS
Output power
5 Watts, max
Voltage accuracy
Full load and nominal Vin
± 1%
Minimum load (Note 1)
10% of FL
Line regulation
LL to HL at Full Load
Load regulation
Cross regulation(Dual)
25% to 100% FL
Single
Dual
Asymmetrical load 25% / 100%
FL
Ripple and noise
20MHz bandwidth
± 0.2%
± 0.5%
± 1%
± 5%
50mVp-p
Temperature coefficient
±0.02% / ºC, max
Transient response recovery time 25% load step change
200uS
Over load protection % of FL at nominal input
170%, typ
Short circuit protection
Continuous, automatics recovery
INPUT SPECIFICATIONS
Input voltage range
MT5A
MT5A-W
12V nominal input
24V nominal input
48V nominal input
24V nominal input
48V nominal input
Input filter
Input surge voltage
100mS max
12V input
24V input
48V input
Input reflected ripple
Nominal Vin and full load
Start up time
Nominal Vin and
constant resistive load
Power up
9 – 18VDC
18 – 36VDC
36 – 75VDC
9 – 36VDC
18 – 75VDC
Pi type
36VDC
50VDC
100VDC
20mAp-p
450mS, max
GENERAL SPECIFICATIONS
Efficiency
Isolation voltage
Input to Output
Input ( Output ) to Case
Isolation resistance
Isolation capacitance
See table
1600VDC, min
1600VDC, min
10⁹ohms, min
300pF, max
Switching frequency
300KHz, typ
Case material
Nickel-coated copper
Base material
Non-conductive black plastic
Potting material
Dimensions
Weight
MTBF (Note 3)
Epoxy (UL94-V0)
1.25 X 0.80 X 0.40 Inch
(31.8 X 20.3 X 10.2 mm)
16g (0.55oz)
3.165 x 10⁶ hrs
ENVIRONMENTAL SPECIFICATIONS
Standard
-25ºC~+85ºC (with derating)
Operating temperature range M1 (Note 2) -40ºC~+85ºC (non-derating)
M2 (W series) -40ºC~+85ºC (with derating)
Maximum case temperature
+100ºC
Storage temperature range
-55ºC ~ +105ºC
Thermal impedance Nature convection
20ºC/watt
Thermal shock
MIL-STD-810D
Vibration
10~55Hz, 10G, 30minitues along X,Y and Z
Relative humidity
5% to 95% RH
EMC CHARACTERISTICS
Conducted emissions
EN55022
Class A
Radiated emissions
EN55022
Class A
ESD
EN61000-4-2
Perf. CriteriaB
Radiated immunity
Fast transient
Surge
Conducted immunity
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
Perf. CriteriaA
Perf. CriteriaB
Perf. CriteriaB
Perf. CriteriaA