MT5-2405SI Datasheet, PDF (1/2 Pages) Volgen Kaga Electronics Inc. – 5 WATT DC/DC CONVERTER SIINGLE & MULTIIPLE OUTPUTS

MT5
5 WATT DC/DC CONVERTER
SINGLE & MULTIPLE OUTPUTS
ELECTRICAL SPECIFICATIONS
All specifications are typical at nominal input, full load
INPUT SPECIFICATIONS
Input Voltage Range........................ 2:1 Wide Range Input
FEATURES
5 SIDED METAL CASE
WIDE INPUT RANGE
HIGH EFFICIENCY AND RELIABILITY,
UP TO 87%
HIGH I/O ISOLATION 1500VDC
INPUT FILTER TO MEET EN 55022-A,
FCC-A, CISPR 22-2 CLASS A
NO DERATING TO 71˚C
LOW OUTPUT RIPPLE AND NOISE
SHORT CIRCUIT PROTECTION
DIRECT PCB-SOLDERING
INDUSTRY STANDARD PINOUT (IC-24P)
LOW PROFILE, 10mm (0.39”) HEIGHT
FIVE YEAR WARRANTY
EMI
Complys with: CISPR CLASS A
OUTPUT SPECIFICATIONS
Ripple Noise.....................................150 mVp-p (DC to 20MHZ)
Line Regulation................................ ±0.5% max.
Line Filter......................................... Built-in
Load Regulation...............................Single: ±1.0% max. (10% ~ 100%)
Dual: ±3.0% max. (10% ~ 100%)
GENERAL SPECIFICATIONS
Isolation Voltage
Primary to Secondary............... 1500 VDC
Primary to Case........................ 750 VDC
Secondary to Case.................... 750 VDC
MTBF.............................................. >1,000,000 hours
Isolation Resistance........................ INPUT-OUTPUT-CASE 1000M-ohms min.
(Measured at 500 VDC)
Short-Circuit Protection................... Continuous
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature ................... -25˚C ~ +71˚C
Temperature Coefficient...................±0.05% / °C
Humidity........................................... 30%~95% RH
Storage Temperature....................... -25°C ~ +85°C
PHYSICAL SPECIFICATIONS
Case Material.....................................Nickel-Plated Steel
Dual In-Line Pin Configuration
10