KLS30F-05S Datasheet, PDF (1/2 Pages) Volgen Kaga Electronics Inc. – 30 WATT OPEN FRAME POWER SUPPLY

KLS30F
30 WATT OPEN FRAME POWER SUPPLY
FEATURES
LOW COST
UNIVERSAL INPUT
HIGH RELIABILITY
OVERVOLTAGE PROTECTION
OVERCURRENT PROTECTION
SUPER SMALL SIZE
HIGH EFFICIENCY
COMPACT LOW PROFILE PACKAGE
TWO YEAR WARRANTY
SAFETIES / EMI
CB
ELECTRICAL SPECIFICATIONS
All specifications are typical at nominal input, full load.
INPUT SPECIFICATIONS
Input Voltage.............................................. 85-264VAC
Input Frequency.......................................... 47-63 Hz
Input Current (100V)................................... 0.2A (5V, 12V, 15V, 24V)
Inrush Current (100V, 50Hz)......................... 20A (Cold Start)
OUTPUT SPECIFICATIONS
Output Voltage........................................... See Chart
Output Voltage Adjustment Range.............. ± 10% (Optilonal)
Over-Voltage Protection.............................. Zener Limiter
Line Regulation........................................... 0.5%
Over-Current Protection.............................. Automatic Recovery
Load Regulation.......................................... 1.0%
Hold-Up Time.............................................. 20 mS
Rise Time.................................................... 200mS max. (At 25˚C nominal
input / output)
Drift............................................................. 0.5% + 15mv
Leakage Current......................................... 0.5 mA or less
Ripple and Noise........................................ 5% + 50 mV
GENERAL SPECIFICATIONS
MTBF........................................................... 100,000 hrs.
Isolation Voltage
Primary to Secondary............... 3000 VAC
Primary to FG........................ 3000 VAC
Secondary to FG.................... 500 VAC
Isolation Resistance.................................... FG 50 MΩ (DC 500V)
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature .............................. 0˚-60˚C
Derates linearly 2.5%/˚C after 50˚C
Cooling........................................................ Convection
Temperature Coefficient.............................. 0.02% / ˚C
Storage Temperature.................................. -20˚C - +75 ˚C
Humidity...................................................... 30% - 85% Rh (Non-condensing)
PHYSICAL SPECIFICATIONS
Open Frame, Glass Epoxy PC Board
86