English
Language : 

IBU60 Datasheet, PDF (1/2 Pages) Volgen Kaga Electronics Inc. – 63W Open frame switching power supplies for Industrial Equipment
IBU60 SERIES
63W Open frame switching power supplies for Industrial Equipment
Description:
The IBU60 series of compact, open frame constructed, AC/DC or DC/DC
switching mode power supplies provide 63 Watts of continuous output
power . They are ideally suited for use in CRT terminals, disc drive
systems, microprocess or based systems, portable equipments and
many other applications, all models are designed to meet the safety
requirements of UL/c-UL(UL 60950-1),TUV-Bauart(EN60950-1) and new
CE requirements. All units are 100% burned in and tested.
Features:
Wide Input Voltage 85 to 280 VAC, 47 to 400 Hz or 100 to 400VDC
Internal EMI filter
Single to Quad Output
Input connector mates with screw terminal (DINKLE#ESK750V-03P)
Output connector mates with Molex housing 09-50-3081 and
Molex 2478 series crimp terminal
Output Voltage Available From 3 VDC Thru 48VDC
Input Surge Current and Over Load protection
Over voltage protection (Crowbar Design)
Size: 3"x5"x1.1"
Class I Insulation
Two Years Warranty
Power Fail Detect (Optional)
Electrical Characteristics:
Safety Approvals :
BAUART
GEPRUFT
TYPE
Product Safety APPROVED
CB
Sym.
Parameter
Test Conditions
Min. Typ. Max. Unit
Vin Input Voltage
Universal Input Voltage
Operating Voltage
90
264 VAC
106
350 VDC
85
280 VAC
100
400 VDC
Fin Input Frequency
47
400 Hz
Wo Output Power Range
Vin= Operating Voltage
0
63 W
Vo Output Voltage Range
See rating chart V
Io Output Current Range
See rating chart A
Iil Input Current (Low Line)
Io=Full load, Vin=115VAC or 160VDC
1.6 A
Iih Input Current (High Line) Io=Full load, Vin=230VAC or 325VDC
0.8 A
Irl Low Line Inrush Current
Io=Full load, 25°c, Cool start,
Vin=115VAC or 160VDC
12 15 A
Irh High Line Inrush Current
Eff Efficiency
Io=Full load, 25°c, Cool start,
Vin=230VAC or 325VDC
26 30 A
Io=Full Load, Vin=230VAC or 325VDC 70 80 88 %
REG-i Line Regulation
Io=Full Load
0.5 1 %
REG-o Load Regulation
Vin=230VAC or 325VDC
36%
OVP Over Voltage Protection
112
132 %
OCP Over Current Protection
Ttr Transient Response
Thold Hold-Up Time
110
Io=Full Load to Half Load,
Vin=100VAC or 140VDC
Io=Full Load, Vin=110VAC or 160VDC 16
150 %
5 mS
mS
Ts Start Up Time
Io=Full Load, Vin=100VAC or 140VDC 0.3 1 2 S
Vrn Ripple & Noise (Pe ak to Peak) Full Load, Vin=85VAC or 100VDC
12%
Ilk Safety Ground Leakage Curr ent Io=Full Load, Vin=240VAC
0.4 0.45 mA
Tc Temperature Coefficient
All output
-0.05
0.05 %/°c
Environmental :
Sym.
Parameter
Te s t Conditions
Toper Operating Temperature
Tstg Storage Temperature
Hr Relative Humidity
Pd Derate linearly from 100% load at 50 C to 50% load at 70 C
Min. Typ. Max.
-20
70
-40
85
5
95
Unit
C
C
%
Safety Specifications:
Sym.
Parameter
Vps
Dielectric Withstanding Voltage
for Primary to secondary
Dielectric Withstanding Voltage
Vpg for Primary to Ground
Ri Isolation Resistance
CISPR EMI requirements for CISPR-22
FCC EMI requirements for FCC PART-15
Te s t Conditions
Primary to secondary
Primary to ground
Test Voltage=500VDC
Vin=220VAC
Vin=110VAC
Min. Typ. Max. Unit
4242
VDC
2121
50
B
B
VDC
M
CLASS
CLASS