|
FEC15-12S33 Datasheet, PDF (1/2 Pages) Power Mate Technology Co., LTD – 15 WATTS OUTPUT POWER | |||
|
FEC15
SINGLE AND DUAL OUTPUT, HIGH DENSITY
15 WATTS DC/DC CONVERTERS
FEATURES
2:1 INPUT RANGE
INCLUDE 3.3VDC OUTPUT
SIX-SIDED SHIELD
2 YEAR WARRANTY
DELIVERS 15 WATTS AT 71ËC AMBIENT
SMALL 1âX2â X0.375â PACKAGE
SAFETIES / EMI
TUV
ELECTRICAL SPECIFICATIONS
All specifications are typical at nominal input, full load, and 25ËC
unless otherwise noted.
INPUT SPECIFICATIONS
Input Voltage Range 12V nominal......9 to 18V
24V nominal......18 to 36V
48V nominal......36 to 72V
Input Filter...........................................Pi Network
OUTPUT SPECIFICATIONS
Voltage Accuracy................................±1%
Ripple and Noise, 20 MHz BW
Single Output......................................50mV P-P, 20mV RMS
Dual Output.........................................75mV P-P, 20mV RMS
Line Regulation, HL-LL.......................±1.0%
Load Regulation, 100% to 10%..........±1.0% (Single)
±2.0% (Dual)
Temperature Coefficient......................±0.02%/ËC
Short Circuit Protection.......................Continuous
Overvoltage Protection Threshold:
3.3V Output.........................................3.9V
5V Output............................................6.2V
12V Output..........................................15V
15V Output..........................................18V
Transient Response Recovery Time,
25% Load Step Change......................500µsec
GENERAL SPECIFICATIONS
Switching Frequency...........................500kHz, (Single) typ.
300kHz, (Dual) typ.
Isolation Voltage.................................1600VDC, min
Isolation Resistance...........................10ËOhms , min
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range............-25ËC to +71ËC
Storage Temperature Range................-55ËC to +125ËC
Cooling.................................................Free-air Convection
EMI/RFI................................................Six-sided Continuous Shield
MTBF....................................................5.651x105Hours
(MIL-HDBK-217F TA=25ËC Full Load)
PHYSICAL SPECIFICATIONS
Case Material.....................................Nickel-Coated Copper with
Non-Conductive Base
Dimensions.........................................2.0x1.0x0.375 Inches
(50.8x25.4x9.5 mm)
14
|
▷ |