HVP050P5000 Datasheet, PDF (1/2 Pages) Voltage Multipliers Inc. – High Voltage Power Supply - 250W Series

High Voltage Power
Supply - 250W Series
HVP050P5000 HVP050N5000
HVP080P3000 HVP080N3000
HVP125P2000 HVP125N2000
HVP Series
The HVP series provide
250 watts of output power
up to 125kV.
The outputs are fully
adjustable from zero to
100% of the maximum
rating.
Built-in EMI filtering,
safety interlocks, over-
voltage/over-current arc
protection, short circuit
protection, and constant
voltage/current operation,
are just a few of the
standard features in this
series.
Features:
• Voltage programming
• Current programming
• Safety interlock
• Short circuit protection
• NEMA 12 enclosure
• Low ripple
ELECTRICAL RATINGS
Part
Number
HVP050P5000
HVP050N5000
HVP080P3000
HVP080N3000
HVP125P2000
HVP125N2000
V_MAX
I_MAX
kV
mA
50
5.0
-50
5.0
80
3.0
-80
3.0
125
2.0
-125
2.0
SPECIFICATIONS
Input:
• 115 or 230V AC, 50/60 Hz
Voltage Regulation:
• Less than .5% of Output Voltage
Current Regulation:
• Less than .5% of Output Current
at 20% to 100% of Rated Voltage
Ripple:
• Less than 1% of Output Voltage
Temperature Coefficient:
• 200 ppm/°C
Ambient Temperature:
• Operating: 0°C to 50°C
• Storage:
-20°C to +70°C
Optional HV Cable:
• Dielectric Sciences 2121 (Consult factory)
Dimensions: In. (mm) • Data subject to change without notice.
VOLTAGE MULTIPLIERS INC.
8711 W. Roosevelt Ave.
Visalia, CA 93291
TEL
559-651-1402
FAX
559-651-0740
www.voltagemultipliers.com