VSC8211 Datasheet, PDF (1/2 Pages) Vitesse Semiconductor Corporation – Single Port 10/100/1000BASE-T PHY and 1000BASE-X PHY with SGMII, SerDes, GMII, MII, TBI, RGMII / RTBI MAC Interfaces

ETHERNET PRODUCTS
VSC8211
Single Port 10/100/1000BASE-T PHY and 1000BASE-X PHY with SGMII, SerDes,
GMII, MII, TBI, RGMII / RTBI MAC Interfaces
3.3v 1.2v
GMIII / MII, RGMII,
10/100/1000 Mbps
TBI, RTBI
Ethernet MAC
MDC, MDIO
Vitesse VSC8211
10/100/1000BASE-T
Transceiver
Station Manager
SerDes I/F
Quad
Transformer
Module
Cat-5 UTP
10/100/1000BASE-T
RJ-45
1000BASE-LX
1000BASE-SX
Optical Module
Single mode Fiber
Multi-mode Fiber
Backplane
FEATURES:
Very Low Power Consumption at < 700mW
Patented, Low EMI Line Driver with Integrated Line Side Termination
Resistors
Supports PICMG 2.16 and 3.0 Ethernet Backplanes at Approximately
500mW
Supports Cisco SGMII v 1.7 and 1000BASE-X MACs
Supports RGMII and RTBI v 1.3 & v 2.0 (2.5V & 3.3V)
User-programmable RGMII Timing Compensation
High Performance 1.25 Gbps SerDes
Auto-media Sense Feature Detects and Configures to Support Either
Copper or Fiber Media
Compliant with IEEE 802.3 (10BASE-T, 100BASE-TX, 1000BASE-T,
1000BASE-X) and SFP MSA Specifications
Full Suite of BIST, MAC, Far-end, and Connector Loopback Modes
Over 150m of Category-5 Reach with Industry’s Highest Noise Tolerance
VeriPHY™ Cable Diagnostics Software Suite
Automatic Detection and Correction of Cable Pair Swaps, Pair Skew
and Pair Polarity, Along with Auto MDI/MDI-X Crossover Function
BENEFITS:
Reduces Power Supply Costs
Removes 12 Passive Components, Reducing PCB Area and Cost by 50%
Lowest Power Mode Reduces Power Supply Costs
Connects to Virtually any MAC or Optical Module and can be Used to
Design Copper GBIC/SFP Modules and 100BASE-FX Modules
Simplifies PCB Layout, Eliminating the Need for On-board Delay Lines
Supports Category-5 Copper, Fiber Optic, and Backplane Interfaces From a
Single Device
Single Chip Solution for Flexible Media Support
Ensures Seamless Deployment Throughout Copper and Optical Networks with
Industry’s Highest Tolerance to Noise and Substandard Cabling Infrastructures
Simplifies Comprehensive In-system Test to Ensure the Highest Product
Quality
Ensures Trouble-free Deployment in Real World Ethernet Networks
Enables Network Manufacturers to Simplify Deployment and Improve
Network Management Capabilities of Gigabit Ethernet Links
Compatible with 1st Generation 1000BASE-T PHYs, Minimizing Common
Interoperability Problems
APPLICATIONS:
Media Converters
Dual Media Switch Ports
iSCSI and TOE LOM
Triple Speed Copper GBIC/SFP Modules
100BASE-FX Switch Ports and Modules
Backplanes
PB-VSC8211-002