030AS Datasheet, PDF (8/9 Pages) Vishay Siliconix – Aluminum Capacitors Axial Standard

030/031 AS
Vishay BCcomponents
Aluminum Capacitors
Axial Standard
Table 5
TEST PROCEDURES AND REQUIREMENTS
TEST
NAME OF TEST
REFERENCE
PROCEDURE
(quick reference)
Case Ø D x L = 3.3 x 11 mm
Endurance
IEC 384-4/
EN130 300
subclause 4.13
T_amb = 85 °C ; U_R applied;
1000 hours
Useful life
CECC 30301
subclause 1.8.1
T_amb = 85 °C; U_R and I_R applied;
1500 hours
Shelf life
(storage at
high temperature)
IEC 384-4/
EN130 300
subclause 4.17
Case Ø D L = 4.5 x 10 to 10 x 25 mm
Endurance
IEC 384-4/
EN130 300
subclause 4.13
T_amb = 85 °C; no voltage applied;
500 hours
After test: U_R to be applied for 30 minutes,
24 to 48 hours before measurement
T_amb = 85 °C; U_R applied;
2000 hours
Useful life
CECC 30301
subclause 1.8.1
T_amb = 85 °C; U_R and I_R applied;
3000 hours
Shelf life
(storage at
high temperature)
IEC 384-4/
EN130 300
subclause 4.17
T_amb = 85 °C; no voltage applied;
500 hours
After test: U_R to be applied for 30 minutes,
24 to 48 hours before measurement
REQUIREMENTS
ΔC/C: ± 20 %
tan δ ≤ 2 x spec. limit
Z ≤ 3 x spec. limit
I_L ≤ spec. limit
ΔC/C: ± 50 %
tan δ ≤ 3 x spec. limit
Z ≤ 3 x spec. limit
I_L ≤ spec. limit
no short or open circuit
total failure percentage: ≤ 3 %
ΔC/C, tan δ, Z:
for requirements
see ‘Endurance test’ above
I_L ≤ 2 x spec. limit
U_R ≤ 6.3 V; ΔC/C: + 15/- 30 %
U_R > 6.3 V; ΔC/C: ± 15 %
tan δ ≤ 1.3 x spec. limit
Z ≤ 2 x spec. limit
I_L ≤ spec. limit
U_R ≤ 6.3 V; ΔC/C: + 45/- 50 %
U_R > 6.3 V; ΔC/C: ± 45 %
tan δ ≤ 3 x spec. limit
Z ≤ 3 x spec. limit
I_L ≤ spec. limit
no short or open circuit
total failure percentage: ≤ 1 %
ΔC/C, tan δ, Z:
for requirements
see ‘Endurance test’ above
I_L ≤ 2 x spec. limit
www.vishay.com
186
For technical questions contact: [e-mail]
Document Number: 28327
Revision: 15-Oct-08