English
Language : 

DG2041_11 Datasheet, PDF (6/14 Pages) Vishay Siliconix – Low-Voltage, Low RON Quad SPST Analog Switch
DG2041, DG2042, DG2043
Vishay Siliconix
SPECIFICATIONS (V+ = 5 V)
Parameter
Symbol
Test Conditions
Otherwise Unless Specified
V+ = 5 V, ± 10 %, VIN = 0.8 V or 2.4 Ve
Limits
- 40 °C to 85 °C
Temp.a Min.b Typ.c Max.b Unit
Dynamic Characteristics
Turn-On Timed
Turn-Off Timed
tON
VNO or VNC = 3 V, RL = 300 , CL = 35 pF
Room
Full
tOFF
fig. 1 and 2
Room
Full
13
42
43
19
32
33
ns
Break-Before-Make Time Delay
tD
VNO or VNC = 3 V, RL = 300 , CL = 35 pF
Room
1
(DG2043 Only)
Charge Injectiond
QINJ
CL = 1 nF, VGEN = 0 V, RGEN = 0 , fig. 2
Room
3
pC
Off-Isolationd
Crosstalkd
OIRR
Room
- 63
XTALK
RL = 50 , CL = 5 pF, f = 1 MHz
Room
- 93
dB
Source-Off Capacitanced
CNO(off)
CNC(off)
VIN = 0 V or V+, f = 1 MHz
Room
26
pF
Channel-On Capacitanced
CON
Room
49
Power Supply
Power Supply Current
I+
VIN = 0 V or V+
0.001
1
µA
Notes:
a. Room = 25 °C, full = as determined by the operating suffix.
b. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this data sheet.
c. Typical values are for design aid only, not guaranteed nor subject to production testing.
d. Guarantee by design, nor subjected to production test.
e. VIN = input voltage to perform proper function.
f. Guaranteed by 5 V leakage testing, not production tested.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation
of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum
rating conditions for extended periods may affect device reliability.
www.vishay.com
Document Number: 72091
6
S11-1185-Rev. B, 13-Jun-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000