PE30L0FR472MAB Datasheet, PDF (4/6 Pages) Vishay Siliconix – Fully Sealed Potentiometer Military and Professional Grade

PE30
Vishay Sfernice
Fully Sealed Potentiometer
Military and Professional Grade
OPTIONS
Locating Peg (PE30LL)
Shaft Locking (PE30LD)
Location is obtained by fitting a special washer on the mounting face of the potentiometer.
Old code: LPRP
The shaft locking device consists of a tapered nut tightening a slotted notched washer
against both bushing and shaft.
DBAN tightening torque is 200 Ncm, shaft locking torque being 30 Ncm.
DBAN is also available with all special types.
This device is normally supplied in a separate bag. Can be pre-mounted on request.
1)
2)
14 wrench
12 wrench
Assembling
Method
6.5
15
CENTER DETENT
• Stable position in mid mechanical travel
• Output ratio 50 % ± 10 %
• Rotational life: 10 000 actuations
ORDERING INFORMATION (First order only)
CV1M
Full CW
Full CCW
MARKING
• Vishay trademark
• Part number (including ohmic value and tolerance code)
• Manufacturing date code
• Marking of terminals 3, and a, b, c
PERFORMANCES
TESTS
CONDITIONS
Electrical Endurance
1000 h at rated power
90'/30' - ambient temp. 70 °C
Climatic Sequence
Phase A dry heat 125 °C
Phase B damp heat
Phase C cold - 55 °C
Phase D damp heat 5 cycles
Damp Heat, Steady State
56 days
40 °C 93 % HR
Change of Temperature
5 cycles
- 55 °C at + 125 °C
Mechanical Endurance
25 000 cycles
Shock
50 g’s at 11 ms
3 successive shocks
in 3 directions
Vibration
10 Hz to 55 Hz
0.75 mm or 10 g’s
during 6 h
R_T/R_T (%)
±1%
TYPICAL VALUES AND DRIFTS
R_1-2/R_1-2 (%)
OTHER
-
Contact res. variation: < 3 % Rn
± 0.5 %
±1%
-
± 0.5 %
± 0.5 %
±3%
± 0.1 %
±1%
-
-
± 0.2 %
Insulation resistance: > 10⁴ M
-
Contact res. variation: < 2 % Rn
-
± 0.1 %
± 0.2 %
-
www.vishay.com
For technical questions, contact: [e-mail]
Document Number: 51037
134
See also Application Note: www.vishay.com/doc?51001 and www.vishay.com/doc?52029
Revision: 29-Aug-12
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000