MDRC Datasheet, PDF (4/5 Pages) Vaishali Semiconductor – Resistor/Capacitor Networks, Dual-In-Line, Molded DIP, 16 Pin

Resistor/Capacitor Networks, Dual-In-Line,
Molded DIP, 16 Pin
MDRC
Vishay Dale
PERFORMANCE
TEST
CONDITIONS
Thermal Shock
MDRC1641 and MDRC1642, 5 cycles between - 30 °C and + 85 °C
MDRC1643, 5 cycles between - 65 °C and + 125 °C
Short Time Overload
2.5 x rated working voltage 5 seconds
Low Temperature Operation
MDRC1641 and MDRC1642, 45 minutes at full rated working voltage at - 30 °C
MDRC1643, 45 minutes at full rated working voltage at - 65 °C
Moisture Resistance
240 hours with humidity ranging from 80 % RH to 98 % RH
Resistance to Soldering Heat Leads immersed in + 350 °C solder to within 1/16" of device body for 3 seconds
Shock
Total of 18 shocks at 100 G's
Vibration
12 hours at maximum of 20 G's between 10 and 2000 Hz
Load Life
1000 hours at + 70 °C, rated power applied 1.5 hours “ON”, 0.5 hour “OFF” for full
1000 hour period. Derated according to the curve.
Terminal Strength
4.5 pound pull for 30 seconds
Insulation Resistance
10 000 Megohm (minimum)
Dielectric Withstanding Voltage (200 V_RMS for 1 minute)
MAX ΔR
(Typical Test Lots)
± 0.50 % ΔR
± 0.25 % ΔR
± 0.25 % ΔR
± 0.50 % ΔR
± 0.25 % ΔR
± 0.25 % ΔR
± 0.25 % ΔR
± 0.50 % ΔR
± 0.25 % ΔR
-
-
Document Number: 31524
Revision: 09-Jan-07
For technical questions, contact: [e-mail]
www.vishay.com
65