500PGP-ST Datasheet, PDF (4/5 Pages) Vishay Siliconix – Aluminum Capacitors Power General Purpose Screw Terminals

Aluminum Capacitors
Power General Purpose Screw Terminals
500 PGP-ST
Vishay BCcomponents
ADDITIONAL ELECTRICAL DATA
PARAMETER
CONDITIONS
Voltage
Surge voltage
≥ 400 V versions
Reverse voltage
Current
Leakage current
Inductance
After 1 minute at U_R
After 5 minutes at U_R
Case Ø D = 50 mm
Equivalent series inductance (ESL)
Case Ø D = 65 mm
Case Ø D = 76 mm
Case Ø D = 90 mm
VALUE
U_s = 1.1 x U_R
U_rev ≤ 1 V
I_L1 ≤ 0.006 C_R x U_R + 4 µA
I_L5 ≤ 0.002 C_R x U_R + 4 µA
typ. 16 nH
typ. 19 nH
typ. 20 nH
typ. 20 nH
Table 3
MULTIPLIER OF RIPPLE CURRENT (I_R) AS A FUNCTION OF FREQUENCY
FREQUENCY (Hz)
I_R MULTIPLIER
500
60
0.70
100
0.95
120
1.00
500
1.20
1000
1.30
≥ 10 000
1.40
Table 4
MULTIPLIER OF RIPPLE CURRENT (I_R) AS A FUNCTION OF TEMPERATURE
TEMPERATURE (°C)
I_R MULTIPLIER
40
2.7
60
2.0
70
1.7
85
1.0
Table 5
TEST PROCEDURES AND REQUIREMENTS
TEST
NAME OF TEST
REFERENCE
PROCEDURE
(quick reference)
Endurance
IEC 60384-4/
EN130300
subclause 4.13
T_amb = 85 °C; U_R applied;
2000 hours
Useful life
CECC 30301
subclause 1.8.1
T_amb = 85 °C; U_R and I_R applied;
2000 hours
Shelf life
(storage at
high temperature)
IEC 60384-4/
EN130300
subclause 4.17
T_amb = 85 °C; no voltage applied;
500 hours
After test: U_R to be applied for 30 minutes,
24 to 48 hours before measurement
REQUIREMENTS
ΔC/C: ± 10 %
ESR ≤ 1.3 x spec. limit
Z ≤ 2 x spec. limit
I_L5 ≤ spec. limit
ΔC/C: ± 30 %
ESR ≤ 3 x spec. limit
Z ≤ 3 x spec. limit
I_L5 ≤ spec. limit
no short or open circuit,
no visible damage
total failure percentage: ≤ 3 %
ΔC/C: ± 10 %
ESR ≤ 1.2 x spec. limit
I_L5 ≤ 2 x spec. limit
Document Number: 28390
Revision: 31-Oct-08
For technical questions, contact: [e-mail]
www.vishay.com
167