TFDU6300_09 Datasheet, PDF (3/12 Pages) Vishay Siliconix – Fast Infrared Transceiver Module (FIR, 4 Mbit/s)

TFDU6300
Fast Infrared Transceiver Module (FIR, 4 Mbit/s) _{Vishay Semiconductors}
for 2.4 V to 3.6 V Operation
ABSOLUTE MAXIMUM RATINGS
PARAMETER
TEST CONDITIONS
SYMBOL
Supply voltage range,
transceiver
Supply voltage range,
transmitter
0 V < V_CC2 < 6 V
0 V < V_CC1 < 6 V
V_CC1
V_CC2
Voltage at all I/O pins
Input currents
Output sinking current
Power dissipation
Junction temperature
Ambient temperature range
(operating)
Storage temperature range
Soldering temperature
Average output current
Repetitive pulse output current
ESD protection
V_in < V_CC1 is allowed
For all pins, except IRED anode pin
See section
“Recommended Solder Profiles”
< 90 µs, t_on < 20 %
Human body model
P_D
T_J
T_amb
T_stg
I_IRED (DC)
I_IRED (RP)
Note
Reference point pin 8, (ground) unless otherwise noted.
Typical values are for design aid only, not guaranteed nor subject to production testing.
MIN.
- 0.5
- 0.5
- 0.5
- 25
- 25
1
TYP.
MAX.
6
6.5
6
10
25
500
125
+ 85
+ 85
260
150
700
UNIT
V
V
V
mA
mA
mW
°C
°C
°C
°C
mA
mA
kV
EYE SAFETY INFORMATION
STANDARD
IEC/EN 60825-1 (2007-03), DIN EN 60825-1 (2008-05) “SAFETY OF LASER PRODUCTS -
Part 1: equipment classification and requirements”, simplified method
IEC 62471 (2006), CIE S009 (2002) “Photobiological Safety of Lamps and Lamp Systems”
DIRECTIVE 2006/25/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 5^th April 2006
on the minimum health and safety requirements regarding the exposure of workers to risks arising from
physical agents (artificial optical radiation) (19^th individual directive within the meaning of article 16(1)
of directive 89/391/EEC)
CLASSIFICATION
Class 1
Exempt
Exempt
Note
Vishay transceivers operating inside the absolute maximum ratings are classified as eye safe according the above table.
ELECTRICAL CHARACTERISTICS ⁽¹⁾
PARAMETER
TEST CONDITIONS
SYMBOL
MIN.
TYP.
MAX.
TRANSCEIVER
Supply voltage
Dynamic Supply current
Shutdown supply current
V_CC
2.4
3.6
Receive mode only, idle
In transmit mode, add additional 85 mA (typ) for IRED current.
Add RXD output current depending on RXD load.
SIR mode
I_CC
1.8
3
MIR/FIR mode
I_CC
2
3.3
SD = high
T= 25 °C, not ambient light
sensitive, detector is disabled in
I_SD
0.01
shutdown mode
SD = high, full specified
Shutdown supply current
temperature range, not ambient
I_SD
1
light sensitive
Operating temperature range
Input voltage low (TXD, SD)
T_A
- 25
V_IL
- 0.5
+ 85
0.5
UNIT
V
mA
mA
µA
µA
°C
V
Document Number: 84763 For technical questions within your region, please contact one of the following:
Rev. 2.0, 04-Aug-09
[e-mail], [e-mail], [e-mail]
www.vishay.com
3