TCLT111 Datasheet, PDF (3/7 Pages) Vishay Siliconix – Extra low coupling capacitance

www.vishay.com
TCLT111. Series
Vishay Semiconductors
SAFETY AND INSULATION RATINGS
PARAMETER
TEST CONDITION
SYMBOL
VALUE
UNIT
Tested withstanding isolation voltage
Maximum transient isolation voltage
Maximum repetitive peak isolation voltage
Partial discharge test voltage - lot test (sample test)
Isolation resistance
According to UL1577, t = 1 s
According to DIN EN 60747-5-5
According to DIN EN 60747-5-5
t_Tr = 60 s, t_test = 10 s, (see figure 2)
T_amb = 25 °C, V_IO = 500 V
T_amb = 100 °C, V_IO = 500 V
T_amb = 150 °C, V_IO = 500 V
(construction test only)
V_ISO
V_IOTM
V_IORM
V_pd
R_IO
R_IO
R_IO
5000
8000
890
13 000
≥ 10¹²
≥ 10¹¹
≥ 10⁹
V_RMS
V_peak
V_peak
V
Ω
Ω
Ω
Output safety power
Input safety current
Input safety temperature
Creepage distance
Clearance distance
Insulation distance (internal)
DIP-6, option 6
DIP-6, option 6
P_SO
265
mW
I_SI
130
mA
T_S
150
°C
≥8
mm
≥8
mm
0.75
mm
Note
• As per IEC 60747-5-5, § 7.4.3.8.2, this optocoupler is suitable for “safe electrical insulation” only within the safety ratings. Compliance with
the safety ratings shall be ensured by means of protective circuits.
300
Phototransistor
250
P_so (mW)
200
150
100
50
0
0
94 9182-2
IR-diode
I_si (mA)
25 50 75 100 125 150
T_si - Safety Temperature (°C)
Fig. 1 - Derating Diagram
V_IOTM
V_pd
V_IOWM
V_IORM
t₁, t₂ = 1 s to 10 s
t₃, t₄ = 1 s
t_test = 10 s
t_stres = 12 s
0
13930
t₁
t_Tr = 60 s
t₃ t_test t₄
t₂ t _stres
t
Fig. 2 - Test Pulse Diagram for Sample Test According to
DIN EN 60747-5-5 (VDE 0884-5); IEC 60747-5-5
SWITCHING CHARACTERISTICS (T_amb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
MIN.
Delay time
Rise time
V_S = 5 V, I_C = 2 mA, R_L = 100 Ω, (see figure 3)
t_d
-
V_S = 5 V, I_C = 2 mA, R_L = 100 Ω, (see figure 3)
t_r
-
Fall time
Storage time
Turn-on time
V_S = 5 V, I_C = 2 mA, R_L = 100 Ω, (see figure 3)
t_f
-
V_S = 5 V, I_C = 2 mA, R_L = 100 Ω, (see figure 3)
t_s
-
V_S = 5 V, I_C = 2 mA, R_L = 100 Ω, (see figure 3)
t_on
-
Turn-off time
Turn-on time
Turn-off time
V_S = 5 V, I_C = 2 mA, R_L = 100 Ω, (see figure 3)
t_off
-
V_S = 5 V, I_F = 10 mA, R_L = 1 kΩ, (see figure 4)
t_on
-
V_S = 5 V, I_F = 10 mA, R_L = 1 kΩ, (see figure 4)
t_off
-
TYP.
3
3
4.7
0.3
6
5
9
10
MAX.
-
-
-
-
-
-
-
-
UNIT
μs
μs
μs
μs
μs
μs
μs
μs
Rev. 1.6, 15-Oct-15
3
Document Number: 81282
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000