English
Language : 

MDM Datasheet, PDF (3/5 Pages) ITT Industries – Micro-D Metal Shell - .050 Contact Spacing
MDM (Military M83401)
Vishay Dale Thick Film Resistor Networks Military, MIL-PRF-83401 Qualified,
Type RZ Dual-In-Line Package, 01, 03, 05 Schematics
CIRCUIT APPLICATIONS
01 SCHEMATIC
• • •• ••• •
Pin #1
MDM1401
MDM1601
03 SCHEMATIC
Pin #1
MDM1403
MDM1603
05 SCHEMATIC
R1 R1 R1 R1
R1 R1 R1
R2 R2 R2
R2 R2 R2 R2
R1 R1 R1 R1
R1 R1 R1
R2 R2 R2 R2
R2 R2 R2
Pin #1
MDM1405, MDM1605
MDM1401 (M8340101xxxxxxB)
MDM1601 (M8340102xxxxxxB)
13 or 15 resistors with one pin common
The MDMxx01 provides the user with a choice of 13 or 15 nominally
equal resistors, each connected to a common pin. Commonly used in
the following applications:
• MOS/ROM Pull-up/Pull-down
• Open Collector Pull-up
• “Wired OR” Pull-up
• Power Driven Pull-up
• TTL Input Pull-down
• Digital Pulse Squaring
• TTL Unused Gate Pull-up
• High Speed Parallel Pull-up
MDM1403 (M8340101xxxxxxA)
MDM1603 (M8340102xxxxxxA)
7 or 8 isolated resistors
The MDMxx03 provides the user with a choice of 7 or 8 nominally
equal resistors, with each resistor isolated from all others. Commonly
used in the following applications:
• “Wired OR” Pull-up
• Long-line Impedance Balancing
• Power Driven Pull-up
• LED Current Limiting
• Power Gate Pull-up
• ECL Output Pull-down
• Line Termination
• TTL Input Pull-down
MDM1405 (M8340101xxxxxxJ)
MDM1605 (M8340102xxxxxxJ)
12 or 14 resistor pairs
The MDMxx05 provides the user with a choice of 12 or 14 pairs of
R1/R2 resistor values for pulse squaring and TTL dual-line
terminating requirements.
CAGE CODE: 91637
01 Schematic
03 Schematic
MDM 16
1.50
MDM 14
1.30
1.00
1.60
MDM 16
1.40
MDM 14
1.00
05 Schematic
1.40
MDM 16
MDM 14
1.20
1.00
Single Resistor
0.10
- 55
Derating
+ 25
+ 70
+ 125 + 150
Ambient Temperature °C
Single Resistor
0.20
- 55
+ 25
+ 70
+ 125 + 150
Ambient Temperature °C
Single Resistor
0.05
- 55
+ 25
+ 70
+ 125 + 150
Ambient Temperature °C
www.vishay.com
3
For technical questions, contact: ff2aresistors@vishay.com
Document Number: 31516
Revision: 08-Jul-08