M34C476K060BZSS Datasheet, PDF (3/5 Pages) Vishay Siliconix – Wet Tantalum Capacitors Surface Mount, Molded Case

www.vishay.com
M34
Vishay
STANDARD RATINGS
CAPACITANCE CASE
(μF)
CODE
PART NUMBER
MAX.
ESR AT
+ 25 °C
120 Hz
()
MAX.
IMP. AT
- 55 °C
120 Hz
()
MAX. DCL (μA) AT
+ 25 °C
+ 85 °C
+ 125 °C
MAX. CAPACITANCE
CHANGE (%) AT
- 55 °C + 85 °C + 125 °C
MAX.
RIPPLE
40 kHz
RMS
(mA)
6 V_DC AT + 85 °C; 4 V_DC AT + 125 °C
470
C
M34C477(1)006(2)ZSS
0.9
12
1.0
3.0
- 75 + 10
+ 20
1500
10 V_DC AT + 85 °C; 7 V_DC AT + 125 °C
330
C
M34C337(1)010(2)ZSS
1.0
15
1.0
3.0
- 70
+8
+ 20
1400
15 V_DC AT + 85 °C; 10 V_DC AT + 125 °C
150
C
M34C157(1)015(2)ZSS
1.1
25
1.0
3.0
- 45
+8
+ 20
1400
25 V_DC AT + 85 °C; 15 V_DC AT + 125 °C
120
C
M34C127(1)025(2)ZSS
1.3
25
1.0
5.0
- 42
+8
+ 12
1250
30 V_DC AT + 85 °C; 20 V_DC AT + 125 °C
100
C
M34C107(1)030(2)ZSS
1.3
25
1.0
5.0
- 38
+8
+ 12
1200
50 V_DC AT + 85 °C; 30 V_DC AT + 125 °C
68
C
M34C686(1)050(2)ZSS
1.5
35
1.0
5.0
- 25
+8
+ 15
1050
60 V_DC AT + 85 °C; 40 V_DC AT + 125 °C
47
C
M34C476(1)060(2)ZSS
2.0
44
1.0
5.0
- 25
+8
+ 12
1050
75 V_DC AT + 85 °C; 50 V_DC AT + 125 °C
33
C
M34C336(1)075(2)ZSS
2.5
66
1.0
5.0
- 25
+5
+9
1050
100 V_DC AT + 85 °C; 65 V_DC AT + 125 °C
15
C
M34C156(1)100(2)ZSS
3.5
125
1.0
5.0
- 18
+3
+ 10
1050
125 V_DC AT + 85 °C; 85 V_DC AT + 125 °C
10
C
M34C106(1)125(2)ZSS
5.5
175
1.0
5.0
- 15
+3
+ 10
1050
Note
• Part number definitions:
(1) Capacitance tolerance: K, M
(2) Termination/packaging: A = 100 % tin (RoHS compliant), bulk; B = Std, tin/lead, bulk
Reliability level: Z = Non-ER
Temperature: S = STD
ESR: S = STD
PERFORMANCE CHARACTERISTICS OF M34 CAPACITORS
ELECTRICAL CHARACTERISTICS
ITEM
Operating temperature range
Capacitor tolerance
Capacitance change (maximum)
ESR
AC ripple current
DCL (maximum leakage current)
Impedance (maximum)
Reverse voltage
Surge voltage
Life test
PERFORMANCE CHARACTERISTICS
- 55 °C to + 125 °C
± 20 %, ± 10 %, at 120 Hz
Limits per standard ratings table
Limits per standard ratings table
Limits per standard ratings table
Limits per standard ratings table
Limits per standard ratings table
Reverse voltage shall be in accordance with DSCC drawing 93026.
There shall be no continuous reverse voltage. Transient reverse
voltage surges are acceptable under the following conditions:
a) Peak reverse voltage is equal to or less than 1.5 V and the product
of the peak current times the duration of the reverse transient
is 0.05 A or less.
b) The repetition rate of the reverse voltage surges is less than 10 Hz.
Surge voltage shall be in accordance with MIL-PRF-39006 and Table II
of DSCC93026. The DC rated surge voltage is the maximum voltage to
which the capacitors should be subjected under any conditions. This
includes transcients and ripple at the highest line voltage. The surge
voltage is 115 % of rated DC working voltage.
The capacitors shall be capable of withstanding a 2000 h life test at
85 °C at rated voltage
Revision: 28-Jul-11
3
Document Number: 40106
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000