IL420_12 Datasheet, PDF (3/7 Pages) Vishay Siliconix – Optocoupler, Phototriac Output, High dV/dt, Low Input Current

Optocoupler, Phototriac Output,
High dV/dt, Low Input Current
IL420, IL4208
Vishay Semiconductors
ELECTRICAL CHARACTERISTICS (T_amb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
PART SYMBOL MIN. TYP. MAX. UNIT
INPUT
Forward voltage
Reverse current
Input capacitance
Thermal resistance, junction to ambient
OUTPUT
I_F = 10 mA
V_R = 6 V
V_F = 0 V, f = 1 MHz
V_F
I_R
C_IN
R_thja
1.16 1.35
V
0.1
10
μA
40
pF
750
°C/W
Off-state current
On-state voltage
Surge (non-repetitive), on-state current
Holding current
V_D = V_DRM, T_amb = 100 °C
I_T = 300 mA
f = 50 Hz
I_DRM
V_TM
I_TSM
I_H
10
100
μA
1.7
3
V
3
A
65
500
μA
Latching current
LED trigger current
Trigger current temperature gradient
V_T = 2.2 V
V_D = 5 V
I_L
I_FT
I_FT/T_j
500
μA
1
2
mA
7
14 μA/°C
Critical rate of rise off-state voltage
Critical rate of rise of voltage at current
commutation
Critical rate of rise of on-state current
commutation
V_D = 0.67 V_DRM, T_j = 25 °C
V_D = 0.67 V_DRM, T_j = 80 °C
V_D = 230 V_RMS,
I_D = 300 mA_RMS, T_J = 25 °C
V_D = 230 V_RMS,
I_D = 300 mA_RMS, T_J = 85 °C
dV/dt_cr
dV/dt_cr
10 000
5000
dV/dt_crq
8
dV/dt_crq
7
dI/dt_crq
12
V/μs
V/μs
V/μs
V/μs
A/ms
Thermal resistance, junction to ambient
R_thja
150
°C/W
COUPLER
Critical rate of rise of coupled
input/output voltage
I_T = 0 A, V_RM = V_DM = V_DRM
dV/dt
5000
V/μs
Capacitance (input to output)
Isolation resistance
f = 1 MHz, V_IO = 0 V
V_IO = 500 V, T_amb = 25 °C
V_IO = 500 V, T_amb = 100 °C
C_IO
0.8
pF
R_IO
 10¹²

R_IO
 10¹¹

Note
• Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering
evaluation. Typical values are for information only and are not part of the testing requirements.
SWITCHING CHARACTERISTICS (T_amb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL MIN.
Turn-on time
V_RM = V_DM = V_DRM
t_on
TYP.
35
MAX.
UNIT
μs
Document Number: 83629
Rev. 2.0, 29-Mar-11
For technical questions, contact: [e-mail]
www.vishay.com
3
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000