English
Language : 

DG384A_MIL Datasheet, PDF (3/9 Pages) Vishay Siliconix – CMOS Analog Switches
DG384A_MIL/387A_MIL
Vishay Siliconix
ABSOLUTE MAXIMUM RATINGS
Voltages Referenced to V–
V+ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 V
GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 V
Digital Inputsa, VS, VD . . . . . . . . . . . . . . . . . . . . . . . . (V–) –2 V to (V+) +2V or
30 mA, whichever occurs first
Current, Any Terminal Except S or D . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 mA
Continuous Current, S or D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 mA
(Pulsed at 1 ms, 10% duty cycle max) . . . . . . . . . . . . . . . . . . . . . . . . . . 100 mA
Storage Temperature
(AA, AK, Suffix) . . . . . . . . . . . . . . –65 to 150_C
Power Dissipationb
14-Pin CerDIPc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 825 mW
10-Pin Metal Cand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 450 mW
Notes:
a. Signals on SX, DX, or INX exceeding V+ or V– will be clamped by internal
diodes. Limit forward diode current to maximum current ratings.
b. All leads welded or soldered to PC Board.
c. Derate 11 mW/_C above 75_C
d. Derate 6 mW/_C above 75_C
SCHEMATIC DIAGRAM (TYPICAL CHANNEL)
V+
VIN
GND
V–
Level
Shift/
Drive
FIGURE 1.
S
V–
V+
D
Document Number: 71679
S-04302—Rev. A, 16-Jul-01
www.vishay.com
3