DBF050166HQ Datasheet, PDF (3/4 Pages) Vishay Siliconix – High feed-through currents

www.vishay.com
DBF 050166 HQ
Vishay Draloric
MOUNTING GUIDELINES
• The connection to one electrode must be flexible in order to prevent the generation of physical force which could damage the
capacitor elements. Such forces are often generated by the dimensional differences resulting from the normal physical
tolerances of these components.
• The capacitor elements must not be used as a mechanical support for other devices or components.
• Use two wrenches when tightening the nuts on both sides of the conductor rod.
The outer electrode terminal flange of these feed-through capacitors components should be fixed after tightening the inner
electrode’s connection.
• Make sure that not too much force applied to the solder connections between hardware and noble metal electrode. A torque
less than 5 Nm is recommended.
DERATING DIAGRAM
U_g (kV_p)
1000
100 ^Qg
10 ^Ug
1
I_g
0.1
0.1
DBF50166BQ125P36CB
2.24 MHz
33.3 MHz
1
10
100
Frequency (MHz)
I_g (A_RMS)
Q_g (kvar)
1000
100
10
1
0.1
1000
RELATED DOCUMENTS
General Information
www.vishay.com/doc?22071
Revision: 02-Sep-15
3
Document Number: 22107
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000