DB050110 Datasheet, PDF (3/4 Pages) Vishay Siliconix – High voltage ratings

www.vishay.com
DB 050110, DB 050180
Vishay Draloric
MOUNTING GUIDELINES
• The connection to one electrode must be flexible in order to prevent the generation of physical force which could damage the
capacitor elements. Such forces are often generated by the dimensional differences resulting from the normal physical
tolerances of these components.
• The capacitor elements must not be used as a mechanical support for other devices or components.
• Use two wrenches when tightening the nuts on both sides of the conductor rod.
The outer electrode terminal flange of these feed-through capacitors components should be fixed after tightening the inner
electrode’s connection.
• Make sure that not too much force applied to the solder connections between hardware and noble metal electrode. A torque
less than 5 Nm is recommended.
DERATING DIAGRAMS
DB050110BJ202##BK1
U_g (kV_p)
1000
0.14 MHz
2.24 MHz
100 _Qg
10 _Ug
1
I_g
0.1
0.01
U_g (kV_p)
100
U_g
10 Q_g
0.1
1
10
Frequency (MHz)
DB050180WP152##BJ1
0.04 MHz
3.79 MHz
1
I_g
0.1
0.001
0.01
0.1
1
10
Frequency (MHz)
I_g (A_RMS)
Q_g (kvar)
1000
100
10
1
0.1
100
I_g (A_RMS)
Q_g (kvar)
100
10
1
0.1
100
U_g (kV_p)
100
U_g
10
Q_g
DB050180WP102##BJ1
0.06 MHz
5.68 MHz
1
I_g
0.1
0.001
U_g (kV_p)
1000
0.01
0.1
1
10
Frequency (MHz)
DB050180WP302##BK1
0.03 MHz
1.91 MHz
100
U_g
10
Q_g
1
I_g
0.1
0.001
0.01
0.1
1
10
Frequency (MHz)
I_g (A_RMS)
Q_g (kvar)
100
10
1
0.1
100
I_g (A_RMS)
Q_g (kvar)
1000
100
10
1
0.1
100
RELATED DOCUMENTS
General Information
www.vishay.com/doc?22071
Revision: 26-Feb-16
3
Document Number: 22105
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000