DB030088 Datasheet, PDF (3/6 Pages) Vishay Siliconix – Wide range of capacitance values

www.vishay.com
DB 030088, DB 030100
Vishay Draloric
MOUNTING GUIDELINES
• The connection to one electrode must be flexible in order to prevent the generation of physical force which could damage the
capacitor elements. Such forces are often generated by the dimensional differences resulting from the normal physical
tolerances of these components.
• The capacitor elements must not be used as a mechanical support for other devices or components.
• Use two wrenches when tightening the nuts on both sides of the conductor rod.
The outer electrode terminal flange of these feed-through capacitors components should be fixed after tightening the inner
electrode’s connection.
• Make sure that not too much force applied to the solder connections between hardware and noble metal electrode. A torque
less than 5 Nm is recommended.
DERATING DIAGRAMS
DB030088BH151##BG1
U_g (kV_p)
100
1.70 MHz 11.93 MHz
U_g
10
Q_g
1
I_g
0.1
0.1
U_g (kV_p)
100
1
10
100
Frequency (MHz)
DB030088BH202##BK1
0.10 MHz
1.19 MHz
U_g
10
Q_g
1
I_g
0.1
0.01
U_g (kV_p)
100
0.1
1
Frequency (MHz)
DB030100BP101##BF1
1.49 MHz
47.7 MHz
10 ^Ug
Q_g
1
I_g
0.1
0.1
1
10
100
Frequency (MHz)
I_g (A_RMS)
Q_g (kvar)
100
10
1
0.1
1000
I_g (A_RMS)
Q_g (kvar)
100
10
1
0.1
10
I_g (A_RMS)
Q_g (kvar)
100
10
1
0.1
1000
U_g (kV_p)
100
U_g
10
Q_g
1
I_g
0.1
0.01
U_g (kV_p)
100
Q_g
10
U_g
1
I_g
DB030088BH102##BJ1
0.19 MHz
2.39 MHz
I_g (A_RMS)
Q_g (kvar)
100
10
1
0.1
1
Frequency (MHz)
DB030088BH252##BK1
0.08 MHz
0.95 MHz
0.1
10
I_g (A_RMS)
Q_g (kvar)
100
10
1
0.1
0.01
U_g (kV_p)
100
0.1
1
Frequency (MHz)
DB030100BP121##BG1
1.24 MHz
39.8 MHz
10 ^Ug
Q_g
1
I_g
0.1
0.1
1
10
100
Frequency (MHz)
0.1
10
I_g (A_RMS)
Q_g (kvar)
100
10
1
0.1
1000
Revision: 14-Sep-15
3
Document Number: 22104
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000