CNY17F_08 Datasheet, PDF (3/10 Pages) Vishay Siliconix – Optocoupler, Phototransistor Output,no Base Connection

Optocoupler, Phototransistor Output,
no Base Connection
CNY17F
Vishay Semiconductors
ELECTRICAL CHARACTERISTCS
PARAMETER
TEST CONDITION
PART SYMBOL MIN.
TYP.
MAX.
UNIT
COUPLER
Collector emitter, saturation voltage
Coupling capacitance
I_F = 10 mA, I_C = 2.5 mA
V_CEsat
C_C
0.25
0.4
V
0.6
pF
Collector emitter, leakage current
V_CE = 10 V
CNY17F-1
CNY17F-2
CNY17F-3
I_CEO
I_CEO
I_CEO
2.0
50
nA
2.0
50
nA
5.0
100
nA
CNY17F-4
I_CEO
5.0
100
nA
Note
T_amb = 25 °C, unless otherwise specified.
Minimum and maximum values were tested requierements. Typical values are characteristics of the device and are the result of engineering
evaluations. Typical values are for information only and are not part of the testing requirements.
CURRENT TRANSFER RATIO
PARAMETER
TEST CONDITION
Current transfer ratio
I_F = 10 mA
I_F = 1.0 mA
PART
CNY17F-1
CNY17F-2
CNY17F-3
CNY17F-4
CNY17F-1
CNY17F-2
CNY17F-3
CNY17F-4
SYMBOL
CTR
CTR
CTR
CTR
CTR
CTR
CTR
CTR
MIN.
40
63
100
160
13
22
34
56
Note
Current transfer ratio I_C/I_F at V_CE = 5.0 V, 25 °C and collector emitter leakage current by dash number.
TYP.
30
45
70
90
MAX.
80
125
200
320
UNIT
%
%
%
%
%
%
%
%
SWITCHING CHARACTERISTICS
PARAMETER
TEST CONDITION
LINEAR OPERATION (WITHOUT SATURATION)
Turn-on time
Rise time
Turn-off time
Fall time
Cut-off frequency
I_F = 10 mA, V_CC = 5.0 V,
R_L = 75 Ω
I_F = 10 mA, V_CC = 5.0 V,
R_L = 75 Ω
I_F = 10 mA, V_CC = 5.0 V,
R_L = 75 Ω
I_F = 10 mA, V_CC = 5.0 V,
R_L = 75 Ω
I_F = 10 mA, V_CC = 5.0 V,
R_L = 75 Ω
PART SYMBOL MIN. TYP. MAX. UNIT
t_on
3.0
µs
t_r
2.0
µs
t_off
2.3
µs
t_f
2.0
µs
f_CO
250
kHz
Document Number: 83607
Rev. 1.5, 07-May-08
For technical questions, contact: [e-mail]
www.vishay.com
223