 English |
|
|
|
|
|
|
|
| BRT21_08 Datasheet, PDF (3/9 Pages) Vishay Siliconix – Optocoupler, Phototriac Output, Zero Crossing | |||
| |||
| ◁ |
BRT21/BRT22/BRT23
Optocoupler, Phototriac Output,
Zero Crossing
Vishay Semiconductors
ELECTRICAL CHARACTERISTICS
PARAMETER
TEST CONDITION
SYMBOL
MIN.
TYP.
MAX.
UNIT
OUTPUT
Off-state voltage
ID(RMS) = 70 µA
VD(RMS)
424
460
V
Repetitive peak off-state voltage
IDRM = 100 µA
VDRM
600
V
Off-state current
VD = VDRM, Tamb = 100 °C,
IF = 0 mA
ID(RMS)
10
100
µA
On-state voltage
IT = 300 mA
VTM
1.7
3.0
V
On-state current
PF = 1.0, VT(RMS) = 1.7 V
ITM
300
mA
Surge (non-repetitive),
on-state current
f = 50 Hz
ITSM
3.0
A
Trigger current temp. gradient
ÎIFT1/ÎTj
7.0
ÎIFT2/ÎTj
7.0
Inhibit voltage temp. gradient
ÎVDINH/ÎTj
- 20
Off-state current in inhibit state
IF = IFT1, VDRM
IDINH
50
Holding current
IH
65
Latching current
VT = 2.2 V
IL
5.0
Zero cross inhibit voltage
IF = rated IFT
VIH
15
Turn-on time
VRM = VDM = VD(RMS)
ton
35
Turn-off time
PF = 1.0, IT = 300 mA
toff
50
Critical rate of rise of off-state
voltage
VD = 0.67 VDRM, Tj = 25 °C
VD = 0.67 VDRM, Tj = 80 °C
dV/dtcr
dV/dtcr
10000
5000
Critical rate of rise of voltage at
current commutation
VD = 0.67 VDRM,
dI/dtcrq ⤠15 A/ms, Tj = 25 °C
VD = 0.67 VDRM,
dI/dtcrq ⤠15 A/ms, Tj = 80 °C
dV/dtcrq
dV/dtcrq
10000
5000
Critical rate of rise of on-state
dI/dtcr
8.0
Thermal resistance, junction to
ambient
RthJA
125
14
µA/K
14
µA/K
mV/K
200
µA
500
µA
mA
25
V
µs
µs
V/µs
V/µs
V/µs
V/µs
A/µs
K/W
COUPLER
Critical rate of rise of coupled
input/output voltage
IT = 0 A, VRM = VDM = VD(RMS)
dVIO/dt
10000
V/µs
Common mode coupling
capacitance
CCM
0.01
pF
Capacitance (input to output)
Isolation resistance
Trigger current
f = 1.0 MHz, VIO = 0 V
CIO
VIO = 500 V, Tamb = 25 °C
Ris
VIO = 500 V, Tamb = 100 °C
Ris
VD = 5.0 V, F - versions
IFT
VD = 5.0 V, H - versions
IFT
VD = 5.0 V, M - versions
IFT
0.8
pF
⥠1012
Ω
⥠1011
Ω
1.2
mA
2.0
mA
3.0
mA
Note
Tamb = 25 °C, unless otherwise specified.
Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering
evaluation. Typical values are for information only and are not part of the testing requirements.
Document Number: 83690
Rev. 1.5, 07-May-08
For technical questions, contact: optocouplers.answers@vishay.com
www.vishay.com
195
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese