153CRV_12 Datasheet, PDF (3/9 Pages) Vishay Siliconix – Aluminum Capacitors SMD (Chip) Long Life Vertical

www.vishay.com
0.4 ± 0.2
L
153 CRV
Vishay BCcomponents
D
WB
W
S
0.3
max.
Fig. 2 - Dimensional outline
Table 2
DIMENSIONS in millimeters AND MASS
NOMINAL CASE SIZE
LxWxH
CASE CODE
L_max.
4.0 x 4.0 x 5.3
0405
4.5
5.0 x 5.0 x 5.3
0505
5.5
6.3 x 6.3 x 5.3
0605
6.8
8.0 x 8.0 x 6.5
0807
8.6
8.0 x 8.0 x 10
0810
8.6
10 x 10 x 10
1010
10.6
10 x 10 x 14
1014
10.6
W_max.
H_max.
ØD
B_max.
S
4.5
5.5
4.0
0.8
1.0
5.5
5.5
5.0
0.8
1.4
6.8
5.5
6.3
0.8
2.0
8.6
6.8
8.0
0.8
2.3
8.6
10.5
8.0
1.1
3.1
10.6
10.5
10.0
1.1
4.7
10.6
14.3
10.0
1.2
4.5
MASS
(g)
 0.13
 0.20
 0.30
 0.50
 1.00
 1.30
 1.50
MOUNTING
The capacitors are designed for automatic placement on to
printed-circuit boards.
Optimum dimensions of soldering pads depend amongst
others on soldering method, mounting accuracy, print
layout and/or adjacent components.
For recommended soldering pad dimensions, refer to Fig. 3
and Table 3.
SOLDERING
Soldering conditions are defined by the curve, temperature
versus time, where the temperature is that measured on the
soldering pad and on top of the case during processing.
For maximum conditions refer to Fig. 4.
Maximum 2 runs with pause of minimum 30 min between.
Any temperature versus time curve which does not exceed
the specified maximum curves may be applied.
AS A GENERAL PRINCIPLE, TEMPERATURE AND
DURATION SHALL BE THE MINIMUM NECESSARY
REQUIRED TO ENSURE GOOD SOLDERING
CONNECTIONS. HOWEVER, THE SPECIFIED MAXIMUM
CURVES SHOULD NEVER BE EXCEEDED.
b
a
c
a
Fig. 3 - Recommended soldering pad dimensions
Table 3
RECOMMENDED SOLDERING PAD DIMENSIONS in millimeters
CASE CODE
a
b
c
0405
2.6
1.6
1.0
0505
3.0
1.6
1.4
0605
3.5
1.6
1.9
0807
4.0
1.6
2.1
0810
3.5
2.5
3.0
1010
4.0
2.5
4.0
1014
4.3
2.5
4.0
Revision: 13-Mar-12
3
Document Number: 28388
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000