153CRV Datasheet, PDF (3/9 Pages) Vishay Siliconix – Aluminum Capacitors SMD (Chip) Long Life Vertical

Aluminum Capacitors
SMD (Chip) Long Life Vertical
153 CRV
Vishay BCcomponents
Table 2
DIMENSIONS in millimeters AND MASS
NOMINAL
CASE SIZE
L×W×H
4.0 × 4.0 × 5.3
5.0 × 5.0 × 5.3
6.3 × 6.3 × 5.3
8.0 × 8.0 × 6.5
8.0 × 8.0 × 10
10 × 10 × 10
10 × 10 × 12
10 × 10 × 14
CASE
CODE
0405
0505
0605
0807
0810
1010
1012
1014
L_MAX. W_MAX. H_MAX. ∅ D B_MAX.
S
C
4.5
4.5 5.5 4.0 0.8 1.0 2.0 ± 0.2
5.5
5.5 5.5 5.0 0.8 1.4 2.3 ± 0.2
6.8
6.8 5.5 6.3 0.8 2.0 2.7 ± 0.2
8.6
8.6 6.8 8.0 0.8 2.3 3.4 ± 0.2
8.6
8.6 10.5 8.0 1.1 3.1 3.0 ± 0.2
10.6 10.6 10.5 10.0 1.1 4.7 3.3 ± 0.2
10.6 10.6 12.3 10.0 1.2 4.5 3.9 ± 0.2
10.6 10.6 14.3 10.0 1.2 4.5 3.9 ± 0.2
MASS
(g)
≈ 0.13
≈ 0.20
≈ 0.30
≈ 0.50
≈ 1.00
≈ 1.30
≈ 1.40
≈ 1.50
MOUNTING
The capacitors are designed for automatic placement on to
printed-circuit boards.
Optimum dimensions of soldering pads depend amongst
others on soldering method, mounting accuracy, print layout
and/or adjacent components.
For recommended soldering pad dimensions, refer to Fig.3
and Table 3.
L
0.4 ± 0.2
WB
CS C
D
W
0.3
max.
Fig.2 Dimensional outline
SOLDERING
Soldering conditions are defined by the curve, temperature
versus time, where the temperature is that measured on the
soldering pad and on top of the case during processing.
For maximum conditions refer to Fig.4.
max. 2 runs with pause of min. 30 min between.
Any temperature versus time curve which does not exceed
the specified maximum curves may be applied.
Fig.3 Recommended soldering
pad dimensions.
AS A GENERAL PRINCIPLE, TEMPERATURE AND
DURATION SHALL BE THE MINIMUM NECESSARY
REQUIRED TO ENSURE GOOD SOLDERING
CONNECTIONS. HOWEVER, THE SPECIFIED
MAXIMUM CURVES SHOULD NEVER BE
EXCEEDED.
Table 3
RECOMMENDED SOLDERING PAD DIMENSIONS in millimeters
CASE CODE
A
B
C
0405
2.6
1.6
1.0
0505
3.0
1.6
1.4
0605
3.5
1.6
1.9
0807
4.0
1.6
2.1
0810
3.5
2.5
3.0
1010
4.0
2.5
4.0
1012
4.3
2.5
4.0
1014
4.3
2.5
4.0
Document Number: 28388
Revision: 12-Dec-07
For technical questions, contact: [e-mail]
www.vishay.com
3