050PED-PW Datasheet, PDF (3/12 Pages) Vishay Siliconix – Aluminum Capacitors Power Eurodin Printed Wiring

www.vishay.com
050/052 PED-PW
Vishay BCcomponents
2.5
Ø D + 1 max.
L
L + 5 max.
Case Ø D = 35 mm
4.9 ± 0.2
Fig. 6 - Printed wiring pin version
Ø D + 1 max.
L
L + 5 max.
4.9 ± 0.2
Case Ø D = 40 mm
Fig. 8 - Printed wiring pin version
15 ± 0.1
2
-
3
1
7.5 ± 0.1
Case Ø D = 35 mm
17.5 ± 0.1
1.3
(4 x)
Fig. 7 - Mounting hole diagram viewed from component side
2.5
20 ± 0.1
3-
2
4
1
10 ± 0.1
17.5 ± 0.1
20 ± 0.1
Case Ø D = 40 mm
1.3
(5 x)
Fig. 9 - Mounting hole diagram viewed from component side
0.8
Ø D + 1 max.
L
L + 2 max.
9±1
10 ± 0.5
Case Ø D = 40 mm
Fig. 10 - Solder-lug version (SL): only available in 050 series
MOUNTING
When a number of capacitors are connected in a bank, they must not be closer together than 15 mm, when no derating of ripple
current and/or temperature is applied.
Pin numbers 2, 3 and 4 (if present) should be free from the electrical circuit or connected to the minus terminal.
Revision: 02-Aug-11
3
Document Number: 28345
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000