TCMT1600_15 Datasheet, PDF (2/10 Pages) Vishay Siliconix – Optocoupler, Phototransistor Output, AC Input

www.vishay.com
TCMT1600, TCMT4600, TCMT4606
Vishay Semiconductors
ABSOLUTE MAXIMUM RATINGS (T_amb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
VALUE
UNIT
OUTPUT
Collector emitter voltage
Emitter collector voltage
Collector current
Collector peak current
Power dissipation
Junction temperature
COUPLER
V_CEO
70
V
V_ECO
7
V
I_C
50
mA
t_p/T = 0.5, t_p ≤ 10 ms
I_CM
100
mA
P_diss
150
mW
T_j
125
°C
AC isolation test voltage (RMS)
Total power dissipation
Operating ambient temperature range
Storage temperature range
Soldering temperature ⁽¹⁾
V_ISO
P_tot
T_amb
T_stg
T_sld
3750
250
-40 to +100
-40 to +125
260
V_RMS
mW
°C
°C
°C
Notes
• Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute
maximum ratings for extended periods of the time can adversely affect reliability.
(2) _{Wave soldering three cycles are allowed. Also refer to “Assembly Instructions” (www.vishay.com/doc?80054).}
ELECTRICAL CHARACTERISTICS (T_amb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
MIN.
TYP.
MAX.
UNIT
INPUT
Forward voltage
Junction capacitance
OUTPUT
I_F = ± 50 mA
V_F
V_R = 0 V, f = 1 MHz
C_j
-
1.35
1.6
V
-
8
-
pF
Collector emitter voltage
Emitter collector voltage
Collector dark current
COUPLER
I_C = 100 μA
V_CEO
70
I_E = 100 μA
V_ECO
7
V_CE = 20 V, I_F = 0
I_CEO
-
-
-
V
-
-
V
-
100
nA
Collector emitter saturation voltage I_F = ± 10 mA, I_C = 1 mA
V_CEsat
-
Cut-off frequency
V_CE = 5 V, I_F = ± 10 mA,
R_L = 100 Ω
f_c
-
Capacitance (input to output)
f = 1 MHz
C_IO
-
-
0.3
V
100
-
kHz
0.3
-
pF
Note
• Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering
evaluation. Typical values are for information only and are not part of the testing requirements.
CURRENT TRANSFER RATIO (T_amb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
PART
SYMBOL MIN.
TCMT1600
CTR
80
I_C/I_F
V_CE = 5 V, I_F = ± 5 mA
TCMT4600
CTR
80
TCMT4606
CTR
100
TYP.
MAX.
300
300
300
UNIT
%
%
%
Rev. 2.6, 21-Jul-15
2
Document Number: 83512
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000